Welcome to the W1TP museum of telegraph items. I hope you will find it interesting. In the main museum site, you will find a brief history of telegraph instruments and a bibliography as well as items of interest to collectors and links to my illustrated virtual museums of telegraph and scientific instruments, Enigma cipher machines, radios, microphones, and electromedical devices with their downloadable (copyrighted) pictures. The brief descriptions of each telegraph item should be helpful in identifying instruments that you turn up, and you can always e-mail or write to me for more information.
SEARCHING THIS LIST:
This is the entire searchable list of all items in the museum.
If you view this list in your web browser and use the SEARCH or FIND
feature (Usually: EDIT / FIND-ON-THIS-PAGE) to locate items of interest,
you can then read the descriptions and/or click on the
associated photographs to see pictures of each item. You may also download
this list into your computer as an ASCII (Text)
file and use the search feature in your word processor to help you
find items of interest. You can then take the item number and go to
the museum to find a photograph of most telegraph instruments on this list.
** SEARCHABLE INDEX: ** THE TELEGRAPH MUSEUM:
(The instruments are in approximate chronological order: Oldest first.)
(I am always looking for equipment or photographs for the museum.)
Click on photographs then click "GO BACK" to return to text.
The most widely used source of electrical voltage for telegraph circuits was the 'Gravity' or 'Crow's Foot' battery and other similar 'wet' batteries.
0000t The first battery was demonstrated by Volta in
1799.(14KB)
He made his 'Voltaic Cell' by piling up alternating disks of copper
and zinc and separating them by salt-water moistened pads. This museum
quality handmade replica of the first voltaic cell was completed in 1999,
200 years after Volta made his first cell. Every detail has been
precisely recreated.
0000u Another view of the Voltaic Cell:(16KB)
0000v A closer view of the Voltaic Cell:(15KB)
0000w A closer view of the Voltaic Cell:(13KB)
0000x The Voltaic Cell being presented to the
Pope:
After Volta demonstrated his battery, many versions were made. The most widely used of these was the "Crow's Foot" battery which was named after the unique foot-shaped zinc electrode.
Crow's Foot batteries typically were contained in a 6-inch diameter by 8-inch high glass jar. A copper star-shaped electrode rested on the bottom of the jar and an insulated wire led up and out of the jar carrying the positive voltage. A zinc "crow's foot" shaped electrode was suspended in the upper portion of the jar. The Jar was half filled with water and a considerable amount of copper sulfate or "blue vitriol" was added to the water. After a period of time, the battery would begin producing a voltage of about 1 volt.
The following description of how the battery works is from: "Electric Wiring" by Albert A. Schuhler. McGraw Hill, 1943. It is in the section entitled: "Telegraph Wiring, Job 208, Gravity Cell"
"The electrolyte is derived from a blue vitriol and water solu- tion. The blue vitriol must completely cover the copper element, and sufficient water must be added to cover the zinc element. A teaspoonful of sulphuric acid is added to this solution to give the best results. In order to prevent creep- ing of the electrolytic salts, the top of the jar is generally dipped into hot paraffine. Best results are obtained by pouring a layer of pure mineral oil over the top of the electrolyte, because it prevents evaporation as well as the creeping of salts. To put the battery into service after these steps have been taken, it is necessary only to place the cell an a short circuit for about 24 hours. This action produces a light liquid called sulphate of zinc, which forms around the zinc element and protects it. The copper sulphate solution, which remains at the lower end of the jar, is the heavier liquid. Very little care is required for the maintenance of gravity cells, because all they require is an abundant supply of blue vitriol and water. The best results are obtained when both liquids meet at a point midway between the zinc and copper elements. When the blue line falls too low, that is, on the level with or below the top of the copper element, blue vitriol and water should be added. When the copper sulphate begins to fade in color to a light blue, it indicates that blue vitriol should be added. Care must be taken that the blue vitriol crystals fall to the bottom and do not rest on the zinc crowfoot. The blue line should never be permitted to reach the zinc element. If the line rises anywhere near the zinc, the copper sulphate should be siphoned out by means of a hydrometer syringe, or the cell placed on a short circuit. As long as the cell continues in action, the quantity of sulphate of zinc increases. When this becomes too dense, or above 1.15 specific gravity, the top of the liquid should be siphoned out and water added to the remainder."
The following photographs show a typical crow's foot battery and its components: PLEASE NOTE: The battery shows the copper sulphate and water mixture BEFORE it separates into the two layers and no visible dividing line can be detected.
0000 A complete crow's foot battery with copper sulfate electrolyte(14KB)
0000a A new crow's foot battery without electrolyte (17KB)
0000b The separate components of a crow's foot battery (20KB)
0000c Another view of the separate components (20KB)
0000d The copper sulfate crystals (26KB)
0000e Both of the electrodes shown alone (23KB)
0000f The zinc electrode alone (19KB)
0000g The copper electrode alone (15KB)
0000h A complete crow's foot battery producing electricity (15KB)
0000i The copper deposits on the zinc crow's foot after use (19KB)
0001 GORDON PRIMARY BATTERY:(20KB)
This is another style of Telegraph Battery. The writing on the
cover reads: GORDON BATTERY, Patented Oct. 27, 1896, Apr 13, 1897,
Feb. 13, 1900. R. S. A. Signal Cell. Gordon Primary Battery
Company, Waterbury, Conn.
0001a A close-up of the electrodes:(23KB)
0005 WHITE CERAMIC WATERBURY BATTERY JAR COVER:(23KB)
This is a typical white ceramic battery jar cover. It was placed on top
of a glass battery jar and the electrical connections were made to screws
mounted in the holes on top of the cover. The battery manufacturer usually
cast their name into the cover and, in this case it is clearly visible and
reads: WATERBURY PRIMARY CELL, WATERBURY BATTERY CO. WATERBURY, CONN. USA.
It would be interesting to know the relationship between this company
and the GORDON Battery Company (See number 0001).
0006 WHITE CERAMIC EDISON BATTERY JAR COVER:(25KB)
This cover simply reads: EDISON, Made in USA. It has a special additional
hole (marked 'oil' through which ' battery oil ' could be added.
Edison battery oil covered the solution in the battery and reduced
evaporation.
Click on photographs then click "GO BACK" to return to text.
(The instruments are in approximate chronological order: Oldest first.)
* = (Items no longer owned.) ** = (Items in other collections.)
10 * SINGLE-NEEDLE TELEGRAPH SET WITH GONG AND TELEGRAPH-LIKE KEY: (36KB)
This old wooden instrument measures 24" high by 9" wide by 6" deep. It
has a glass window through which the galvanometer needle can be viewed.
The three positions of the needle are labeled: TRAIN ON LINE/LINE
CLOSED/LINE CLEAR. The upper portion is supported by brass pedistals,
exposing a large electrically operated gong. A telegraph key knob juts
out forward from the right side of the instrument and doors open to
reveal that the key lever bends upwards 90 degrees to make and break
contacts. (Most needle telegraph sets use a right-to-left knob or 2
lever key to control the needle movement.) A hand written tag inside
reads:p 6 76. needle 160. bell 45. No 8 22. This unit was used to
control the movement of railroad trains on the British railroads.
(Traded to the Samuel F. B. Morse Museum, Poughkeepsie, NY)
11 DOUBLE-NEEDLE TELEGRAPH SET WITH GONG, HANDLE, AND
TELEGRAPH-LIKE KEY: (11KB)
Similar to number 10 above but with an operating handle
and a 2-needle dial: (17KB)
This view shows the internal mechanism: (16KB)
Another view of the internal mechanism: (16KB)
A view of the 2-needle set in scenic surroundings:
(18KB)
Another view of the 2-needle set in scenic surroundings:
(19KB)
12 EARLY SINGLE NEEDLE TELEGRAPH BY HARRIS: (21KB)
This early telegraph set may have been used as a training
set. A close look at its dial (26KB) shows that
it uses the international morse code with dots to the left and
dashes to the right. The label reads: PHILIP HARRIS & Co. Ltd.,
Scientific Instrument Specialists, Birmingham and Dublin.
The back view shows the coils(22KB) which drive
the needle and a closeup shows the
operating keys(27KB).
15 SINGLE NEEDLE TELEGRAPH INDICATOR: (28KB)
Small 3" diameter table-top galvanometer mounted at an angle in a very
old wooden case. Beveled glass. Large brass contact screws. Bottom of
case stamped: GPO 4046.
16 * PORTABLE SINGLE NEEDLE TELEGRAPH INDICATOR: (16KB)
This is a portable galvanometer indicator housed in a wooden case
with a leather carrying handle.
16a A closer view showing the internal
mechanism: (18KB)
16b A view of the case in the open position:
(18KB)
19 * EARLY BRITISH RAILROAD TELEGRAPH SET:(15KB)
This early railroad telegraph set used a series of bell rings to
carry information about the trains which were operating. A wooden
cover which I was not able to obtain protected the coils and
contacts from dirt.
21 EARLY PORTABLE GALVANOMETER: * 2-1/4" diameter galvanometer in old
wooden box w/leather carry strap 70-0-70 scale. & room for dry battery.
24 TANGENT GALVANOMETER:(25KB)
A large 4" diameter horizontally oriented
compass indicator is located in the center of a 7" vertically oriented
coil of wire all mounted on a wooden stand with leveling screws. The coil
taps are marked 2,50,& 500. Made by Philip Harris Ltd,Birmingham,
England.
30 * THOMPSON MIRROR GALVANOMETER:(47KB)
Mirror galvanometers such as this were used to detect the weak signals
from early submarine telegraph cables, and by Thomas Edison during his
telegraph experiments. A kerosene light or candle was placed in front
of the unit and, when the mirror moved in response to weak electrical
signals, the reflected spot of light moved across a calibrated scale
mounted on the wall of a darkened room. Due to the laws of optics,
the spot of light moved over twice as large an angle as the mirror and
this served to amplify the sensitivity of the instrument. This is an
all brass mirror galvanometer standing on a brass tripod stand with
overhead Earth's Magnetic Field compensating magnets. It was made by
Elliot Brothers-London. Traded to Vince Thompson, K5VT.
31 ANOTHER STYLE OF MIRROR GALVANOMETER:(10KB)
This small mirror galvanometer has a white paper scale integrated
into its design. Light reflects from the moving mirror and onto
the white scale allowing measurements to be made.
32++ * Many MIRROR GALVANOMETERS:(45KB)
By several manufacturers, meter shunts, standard cells, standard
resistors, used to measure the tiny electrical currents on
telegraph lines and ground returns.
(For more details, See my
SCIENTIFIC INSTRUMENT MUSEUM in a different part of this website.)
33 ** ABRAHAM RHEOGRAPH PRISM SYNCHROSCOPE: (32KB)
The first dual-channel Prism Synchroscope. A horizontal rotating
prism provides a time-base for twin high sensitivity, low mass
mirror galvanometers. Projects dual-trace plus time-base information
on a screen. Used to display telegraph cable voltages as a function
of time. In original wooden box. Circa 1907.
35 * FARADAY PHILOSOPHICAL MOTOR: (35KB)
Same as permanent exhibit at Smithsonian. Twin circular mercury
pools with vertical rotating armiture. The first demonstration
of the rotational forces of electric current. Used as a philosophical
stimulus to early beard-scratching and thoughts about duplex telegraph
and polar relays. Circa 1830s.(Traded to John Williams).
40 UNUSUAL NEEDLE TELEGRAPH TRAINING SET: (50KB
This wooden set consists of a needle behind a glass window on one side.
There is a GPO stamp and a complete description of the code alongside
the meter as follows: A/\ B\/// C\/\/ D\// etc. Left deflections
of the needle signaled dashes and right deflections signaled dots.
Note that the code is NOT the morse code but the international code.
As one well-known British key collector told me: "We didn't have much
use for Sammy's code over here." Under this window there are two red
up-down key knobs. Pushing down the left knob moves the needle left
(dash). and the right knob moves it right (dot). The unusual aspect
of this set is that there is an identical window on the back of the
set so that an instructor can send on one side and a student seated
on the other side can practice receiving.
43 ** EARLY BENJAMIN PIKE DIAL TELEGRAPH SET:(15KB)
This is a very early dial telegraph sending and receiving set manufactured
by Benjamin Pike Jr. of 291 Boradway, New York. The transmitting unit
consists of a simple dial with the letters of the alphabet printed around
the edge. The dial of the transmitting unit is first set at the
top position marked Sign. Rotating this dial in a counterclockwise
direction causes a metal brush to make a series of electrical contacts
corresponding to how many letters have been passed. For instance,
turning it to the letter ''C'' would produce 3 electrical pulses.
43a A closer view of the dial:(19KB)
43b The BENJAMIN PIKE DIAL TELEGRAPH RECEIVING
UNIT:(15KB) consists of an identical dial to that on the
transmitter with a pointer that is moved clockwise by an extremely
early electrical coil-operated actuator. It steps clockwise exactly
one letter every time an electrical pulse is received. The pointer
is initially set at the center top of the dial and steps clockwise
until the last pulse is received and it is pointing at the desired letter.
43c A closer view of the receiver dial:(18KB)
43d Another closer view of the receiver dial:(24KB)
43e A view of the back of the dial showing the actuator:(14KB)
43f A closer view of the actuator:(16KB)
43g A view of the actuator's early magnetic coils:(18KB)
43h A view of Pike name on the wooden base:(12KB)
(NOTE: This rare item is owned by collector Charles Crider who has given
me permission to display it in my museum.)
45 MINIATURE FRENCH DIAL TELEGRAPH SET:(13KB)
This tiny sending and receiving set is patterned after the
British Wheatstone design. Rotating the sending dial to a letter causes an
interrupter to send a string of pulses which step the receiving
dial to the same letter. The lever on the side engages or
disengages the bell which rings for each pulse received.
45a Another view of the set:(15KB)
45b A view of the rear of both
units:(11KB)
45c A closer view of the back of the sending
dial:(17KB)
45d A closer view of the back of the
receiver:(10KB)
45e A closer view of the face of the sending
dial:(21KB)
45f A closer view of the face of the receiving
dial:(23KB)
46 UNUSUAL MINIATURE FRENCH DIAL TELEGRAPH SET:(13KB)
This is an unusual and tiny sending and receiving set that is
patterned after the British Wheatstone design. It is somewhat similar
to the set described above however, a tiny telegraph key with an
ivory knob is used to generate the pulses which rotate the dial
of the receiving set to the appropriate letter. The unit is
incomplete. It is missing the solenoid coils and other
parts of its mechanism.
46a Closer view of the front of one dial
unit:(14KB)
46b Closer view of the rear of one dial
unit:(10KB)
48 * VERY UNUSUAL PORTABLE FRENCH DIAL TELEGRAPH TEST
SET: This lovely set was sold at the 2005 Antique Wireless Association
conference. The set allowed the telegraph lines to be tested at any
location by simply throwing a wire over the telegraph line and inserting
another wire into the ground. The set could be closed to protect the internal
apparatus while transporting it.
Click on photographs then click "GO BACK" to return to text.
(The instruments are in approximate chronological order: Oldest first.)
* = (Items no longer owned.) ** = (Items in other collections.)
50 THE ORIGINAL MORSE TELEGRAPH KEY was actually a notched piece of metal
called a Portrule. It was pulled along and the parts of the metal that were
not notched made contact with another piece of metal, completed the electrical
circuit, and produced the dots and dashes of the Morse Code.
50a THE VAIL 'CORRESPONDENT':(41KB) This simple so-
called 'strap key' was used in early tests by Morse and Vail that led up to
the 1844 demonstration. It was given the name 'strap key' because it
consisted of just a simple strap of spring brass.
50b THE ORIGINAL MORSE TELEGRAPH KEY CALLED THE 'LEVER
CORRESPONDENT' THAT WAS USED IN THE 1844 BALTIMORE-WASHINGTON
DEMONSTRATION:(36KB) This key is on display in the Smithsonian Institution
in Washington, DC and it is on loan from the Vail Museum in Morristown,
NJ.
50x A REPRODUCTION OF THE VAIL LEVER CORRESPONDENT MADE BY
KENT IN ENGLAND:(38KB) This key has the same design and measurements as the
original key but it has been given a sand-blasted finish which makes it look
quite different from the polished brass of the original.
50y A LEFT side view of the Lever Correspondent
Reproduction by Kent:(42KB)
50z ** THE EARLIEST CAMELBACK KEY THAT I HAVE
EVER SEEN:(50KB) Owner anonymous.
51 ** EXTREMELY EARLY PALMER AND HALL BOXED COMBINATION
TELEGRAPH KEY AND RELAY SET:
This extremley rare Palmer and Hall telegraph set is contained in a wooden box
that protects the early camelback key and relay from damage. One end of the
box folds down to allow operation of the set while still in the box. The
relay and the box are labeled: Palmer and Hall and the box label reads: PALMER
& HALL electricians, 158 Washington St. Boston, Mass. The box measures: 8.5 x
6 inches. The owner was kind enough to allow me to include these photographs
in my museum prior to selling it on ebay.
51a ** The Palmer & Hall Telegraph Set in its Original
wooden box.
51b ** A different view of the Palmer & Hall Telegraph Set
showing the telegraph key more clearly.
51c ** The operator's end of the Palmer & Hall
Telegraph Set.
51d ** The Maker's Mark on top of the relay in
the Palmer & Hall Telegraph Set.
51e ** A close view of the far end of the key and a
terminal in the Palmer & Hall Telegraph Set.
51f ** The underside of the base of the Palmer & Hall
Telegraph Set.
51g ** The front of the box of the Palmer & Hall
Telegraph Set.
51h ** The inside of the cover of the box of the
Palmer & Hall Telegraph Set showing the Palmer and Hall paper label.
51i ** A close view of the dovetailed corner of the
box of the Palmer & Hall Telegraph Set.
52 ** EXTREMELY EARLY TELEGRAPH AND MINSTREL AMBROTYPE:
(57KB)This extremely early ambrotype is from the Jim Bollman (email:
jim@themusicemporium.com ) collection of very early banjos. It is copyright
(c) Jim Bollman and it is provided courtesy of The Music Emporium
( http://www.themusicemporium.com ).
Ambrotypes were introduced after dagerreotypes and around the middle of the
19th century. They consist of a transparency which is mounted on a black
background. This one shows a grouping of 8 young boys with a banjo and two
telegraph instruments. The grouping and banjo indicate that these boys are
members of one of the popular minstrel groups of the mid 19th century. Three
of the boys are wearing hats and at least two are wearing uniforms which
suggest that they work in a telegraph office. They are holding two extremely
early telegraph instruments and I believe that this is the earliest photograph
of these instruments that has been found.
The left instrument appears to be a Thomas Hall relay similar to the
number 68 ** Palmer & Hall relay shown in my
museum:(16KB)
The right instrument appears to be a similar Hall relay mounted on the same
board with a very curved telegraph key which may be an Hall or some other key.
If it is an Hall key, it is much earlier and more elaborate than the number 67 Hall telegraph key in my museum:(15KB)
Click here to see an enlarged (but very slow loading)
view of this entire picture:(191KB)
I have selected the right instrument and enlarged it to allow much
closer inspection. This is an enlarged view
with no sharpening:(17KB) It reveals that the key has a light-colored
probably ivory knob.
Adding a very high degree of sharpening allows a few more
details to be seen:(26KB)
Still more enlargement:(8KB) starts to show more
additional details of the key's design. However, you will probably have
to step quite far back away from your computer screen to view it.
CONCLUSION: I believe that the key is a Palmer and Hall camelback as
shown in This picture from the Hall Catalog:(12KB).
Although it is difficult to see all of the details in the ambrotype
because the head of a minstrel gets in the way, most details seem to match
the catalog illustration.
52f ** HOMEMADE MODEL OF THE PALMER & HALL
CAMELBACK:(10KB)This key is in the Tom French W1IMQ collection.
It appears to have been modeled after the above key.
52fa ** Another view of the homemade
camelback:(11KB)
52fb ** Another view of the homemade
camelback:(11KB)
52fc ** Another view of the homemade
camelback:(10KB)
52fd ** Another view of the homemade
camelback:(10KB)
52fe ** Another view of the homemade
camelback:(10KB)
52fg ** Another view of the homemade
camelback:(11KB)
52fh ** Another view of the homemade
camelback:(14KB)
53 VERY EARLY PALMER AND HALL OR HALL BOXED PORTABLE
COMBINATION TELEGRAPH KEY AND RELAY SET:
This extremely rare portable telegraph set is enclosed in a strong wooden box
that protects the tiny miniature straight lever key and miniature relay
from damage. The overall design and the spring adjusting mechanism for the
relay is quite unusual. Although there are no obvious markings on the set,
the knurling on the hardware, the shape of the parts, and the design strongly
suggest that it was made by Palmer and Hall or Hall in Boston, Mass.
53a Another view of the Palmer and Hall portable
set:
53b Another view of the Palmer and Hall portable
set:
53c Another view of the Palmer and Hall portable
set:
53d A closer view of the mechanism of the
Palmer and Hall portable set:
53e A closer view of the mechanism of the
Palmer and Hall portable set:
53f A closer view of the key in the
Palmer and Hall portable set:
53g A closer view of the key in the
Palmer and Hall portable set:
53h The front outside of the box of the
Palmer and Hall portable set:
53i The right outside of the box of the
Palmer and Hall portable set:
53j The left outside of the box of the
Palmer and Hall portable set:
53k The bottom of the box of the
Palmer and Hall portable set:
54 ** POSSIBLY THE EARLIEST TELEGRAPH DAGUERREOTYPES:
These daguerreotypes are exhibited with the permission of Mark Koenigsberg
whose daguerreotype museum at: http://www.geocities.com/~daguerreotype
contains many other early pictures on other subjects. They are
copyright (c) Mark Koenigsberg and are the earliest images of
telegraphers and telegraph instruments that I have found.
55 EXTREMELY EARLY CATON 'MORSE'
WEIGHT-DRIVEN REGISTER:(54KB)
This extremely early Morse Register is a fine example of the first
style of paper-tape recorder to be used on the telegraph lines. It
is powered by a weight and pulls a paper tape past a stylus that
makes indentations in the tape for dots and dashes. It was used
in a railroad depot in Stockton Springs, Maine. It was acquired by
James Coose (W1CBU) of Stockton Springs when the station closed and
given to his son-in-law Robert Littlefield (W1MFU) and transferred
to this museum by Diane Coose Littlefield in 1996. It was made by the
Caton Instrument Co. in the 1850's.
The base is stamped: OTTAWA - ILL 433.
55b ANOTHER VIEW OF THE CATON 'MORSE'
REGISTER:(54KB)
55c ANOTHER VIEW OF THE CATON 'MORSE'
REGISTER:(54KB)
56 CATON TELEGRAPH KEY:(12KB)
This early straight lever key was made by the Caton Instrument Co.,
Ottawa, Ill. The long legs pass through holes in the operating table
and wires are attached to binding posts at the end of each leg.
The lever is stamped CATON, OTTAWA, ILL 7?? (illegible),
and the base is stamped with the number 494. Circa 1860's.
57 ** EARLY CATON 'LINEMAN'S TEST SET OR POCKET
RELAY:(18KB)This magnificent pocket relay or 'lineman's test set'
consists of a sensitive sounder and a very early and tiny strap key.
There is a tiny ivory knob on both the key and the shorting lever.
These sets allowed linemen to tap into telegraph lines with a pocket-sized
instrument and they were also used by the military for intercepting and
sending false messages to the enemy. The set is enclosed in an
oval hard rubber case and in a thick leather protective case.
These pocket sets are very hard to find and this one is owned
by collector Bill Carpenter, AA8EY.
57a High Resolution picture of the Caton Pocket
Relay:(48KB)
60 VERY EARLY ELABORATE CAMELBACK KEY & SOUNDER:(63KB)
This all brass key with leaf spring has a massive elaborately curved
lever of the earliest "camelback" or "humpbacked" shape which was
adopted soon after Morse's demonstration. These keys were only made
for a short time because the steel shaft, press fit into the lever,
tended to work loose with use. The sounder is also heavy brass but,
although it was mounted on a board along with this key, I believe that
the sounder may be from a later period. The original wooden base is
missing. The two instruments came from a burned railroad
station in Canada. Circa 1848. The lever shape and large dished
adjusting screw heads are very similar to the two keys shown below.
It has been suggested that these keys were all made by the Dominion
Telegraph Company in Canada but unfortunately, we have very little
information about Canadian Telegraph Companies.
62 VERY EARLY ELABORATE CAMELBACK KEY:(32KB)
This all brass key with early hairpin spring has the same massive
elaborately curved lever as number 210. The hairpin spring suggests
that it is of a slightly later design. It is stamped NWT, the
initials of the early Northwest Telegraph Company of Western Canada.
All underside parts are stamped "2" and it is also stamped 1880., an
inventory date? It came from Canada. Circa 1850.
63 VERY EARLY ELABORATE STRAIGHT LEVER KEY:(32KB)
This extremely early all brass straight lever key is very similar to
the two extremely early camelback keys above. Note that the shorting
lever and adjusting screws are virtually identical to those above.
Like the two camelbacks, it was also located in Canada and it may have
been made by the Dominion Telegraph Company. Circa 1850's. Collector
Pete Malvasi, W2PM owns a sounder which appears to match this key and which is
labeled Dominion Tel Co. and this lends credence to the suggestion that
Dominion made this key although the key below is very similar to this key and
carries the label: FOSTER, Toronto suggesting that this key might have been
made by Foster.
63a Another view of the early straight
lever key:(16KB)
63b A closer view of the early straight
lever key:(16KB)
63c A still-closer view of the early
straight lever key:(32KB)
64 VERY EARLY ELABORATE CANADIAN 'FOSTER'
STRAIGHT LEVER KEY {One Mystery Solved!}:(32KB)
This extremely early all brass straight lever key is very similar to the key
above (Number 0063). Note that the shorting lever and adjusting screws are
virtually identical to those above. This key is labeled: FOSTER, TORONTO and
it appears to be a very early key made in the 1850s. Several keys have
turned up in the last 10 years that are similar to this key but none of them
has carried a maker's name. It is apparent that this key solves the mystery
of who made these other keys by showing that it was "FOSTER" of Canada who
made them.
64a Another view of the very early Foster straight
lever key:(16KB)
64b A view of the underside of the base of the very
early Foster straight lever key:(16KB)
65 * 1850 TELEGRAM AND TAPE FROM A ''HOUSE PRINTING
TELEGRAPH'':(14KB)
This telegraph message was printed on the paper tape
by a 'House Printing Telegraph' instrument in 1850. The 'House' was
first patented in 1848. The tape was delivered to the addressee
in the envelope which carries the date of receipt of the message.
65l Higher Resolution View of the telegram:(70KB)
66 VERY EARLY THOMAS HALL WEIGHT DRIVEN REGISTER:
(24KB) This lovely old register was made by Thomas Hall of
boston in the early 1850's.
66a Another view of the Hall Register:(28KB)
66b Another view of the Hall Register:(26KB)
66c Another view of the Hall Register:(28KB)
66d Another view of the Hall Register:(26KB)
66e Another view of the Hall Register:(27KB)
66f Another view of the Hall Register:(25KB)
66g Another view of the Hall Register:(23KB)
67 VERY EARLY THOMAS HALL CAMELBACK KEY:(15KB)
This lovely camelback key was made by Thomas Hall of Boston circa
the 1850's.
67a The other side of the Hall
camelback:(15KB)
68 * VERY EARLY PALMER & HALL RELAY:(20KB)
This lovely early relay was made by the firm of Palmer & Hall of
Boston sometime between 1847 and 1849. Notice the ivory end caps on
each of the coils and the ivory insulator on the very end of the contact
spacing screw.(Traded to W2PM)
68a *
Closeup of the Name on top of the frame:(11KB)
69 VERY EARLY THOMAS HALL SOUNDER:(26KB)
This lovely early sounder was made by the firm of Thomas Hall of
Boston sometime between 1847 and 1859.
69a Another view of the Thomas Hall Sounder:(28KB)
69b Another view of the Thomas Hall Sounder:(30KB)
70 VERY EARLY CHARLES CHESTER WEIGHT-DRIVEN MORSE REGISTER:(18KB)
This very early register was made by Charles T. Chester of New York in
the 1850's. It is an embossing register which means that it marked
dots and dashes by making impressions in the paper tape rather than
by depositing ink on the tape.
A pair of them was originally purchased and one was traded.
70a The Pair of Chester Registers:(17KB)
70b The Pair of Chester Registers-(other side):(20KB)
71 VERY EARLY CHARLES CHESTER TELEGRAPH KEY:(12KB)
This lovely straight lever key was manufactured by Charles T. Chester
of New York in the 1850's or 1860's. The lever is 5" long and the base is
3".
72 VERY EARLY MINIATURE CHARLES CHESTER TELEGRAPH KEY:(11KB)
This is a smaller version of number 71. The lever is 4" long and the
base is 2" long.
74 * VERY EARLY TILLOTSON WEIGHT-DRIVEN REGISTER:(45KB)
This lovely and very early register was made by Tillotson & Co of New York in
the 1850's. It's design appears to be identical to the Knox & Shain Registers
made in Philadelphia. It is an embossing register which records dots and
dashes on the paper tape by making indentations in the tape with a pointed
stylus. This picture is displayed with the permission of the
owner/collector.
75 * VERY EARLY CHUBBUCK WEIGHT-DRIVEN REGISTER:(24KB)
This very early register was made by Chubbuck in Utica, NY in the 1850's.
It is an embossing register which records dots and dashes on the
paper tape by making indentations in the tape with a pointed stylus.
(traded to K5VT)
75a ANOTHER VIEW OF THE CHUBBUCK REGISTER:(25KB)
76 VERY EARLY CHUBBUCK WEIGHT-DRIVEN REGISTER:(29KB)
Very similar to number 75 above.
76a ANOTHER VIEW OF THE CHUBBUCK REGISTER:(31KB)
76b ANOTHER VIEW OF THE CHUBBUCK REGISTER:(35KB)
76c ANOTHER VIEW OF THE CHUBBUCK REGISTER:(30KB)
76d ANOTHER VIEW OF THE CHUBBUCK REGISTER:(30KB)
79 EARLY WESTERN UNION WEIGHT-DRIVEN REGISTER:(22KB)
This is an early Western Union Weight-Driven Register. The
solid brass sides of the string reel are very unusual. It is an embossing
register which marks dots and dashes on the paper tape by making
indentations in the tape with a pointed stylus.
79a ANOTHER VIEW OF THE WESTERN UNION REGISTER:(22KB)
79b TOP VIEW OF THE WESTERN UNION REGISTER:(21KB)
The register was apparently carried from location to location in this box.
79c WESTERN UNION REGISTER BOX OPEN:(23KB)
79d WESTERN UNION REGISTER BOX CLOSED:(20KB)
The box has the Western Union Label on the front:
79e WESTERN UNION REGISTER BOX LABEL:(20KB)
80 CIVIL WAR ERA PHELPS CAMELBACK KOB,
Marked G.M.PHELPS-MAKER.:(27KB)
These Phelps Camelback keys were the most widely used of the Civil War keys.
Camelback keys have an upward lump like a camel's hump on the lever
between the knob and the pivot. They were only made for about 12 years
from 1853-1865 because the steel trunnion shaft which was press-fit
into the lever would gradually work loose with prolonged use.
The brass lever would then slide left and right making the key unusable.
This key is all brass except for the steel trunion shaft. The key has a
shorting switch and the revolutionary Phelps-invented spring adjusting
screw which was copied and used on just about every key manufactured
after his invention. This particular Phelps key is mounted on
wooden base with its legs shortened to fit into the base. (a common
but unfortunate modification.) A very early
and primitive Tillotson sounder is also mounted on the base making
it into a portable Key (and sounder) On Base, commonly called a
KOB.(1860's)
81 * CAMELBACK LEG KEY: G.M.PHELPS-MAKER.:(10KB)
As above (no base).circa 1860's.(Traded to John Casale - W2NI.)
81a Another view of the Phelps key:(16KB)
CONSTRUCTION PLANS FOR A PHELPS CAMELBACK
KEY:(LOW RESOLUTION): (35KB)
I have often been asked for drawings of the historic Phelps
Camelback Keys by Civil War Reenactors and others who are
interested in making replicas. I have traced a Phelps key
onto 1/4-inch squares graph paper and added the dimensions as best
my shaky hands would allow and I hope that there is enough information
to allow people to build a key from these plans. I offer these plans
in low, medium, and high levels of resolution. They are
copyrighted but single copies may be made and printed for individual
use by any interested person. I would really appreciate seeing
pictures of your completed or in-progress keys!!
81cm CONSTRUCTION PLANS FOR A PHELPS CAMELBACK KEY:
(MEDIUM RESOLUTION): (96KB)
81cl CONSTRUCTION PLANS FOR A PHELPS CAMELBACK KEY:
(HIGH RESOLUTION): (403KB)
The following photographs show many views of a Phelps Key and may be
useful to those who are trying to reproduce one:
82 PHELPS CAMELBACK KEY (Left Top View mounted on
a base:(21KB)
82a PHELPS CAMELBACK KEY (Right Top View mounted on
a base:(22KB)
82b PHELPS CAMELBACK KEY (Left Top View
unmounted:(14KB)
82c PHELPS CAMELBACK KEY (Right Top View
unmounted:(13KB)
82d PHELPS CAMELBACK KEY (Left Side View
unmounted:(13KB)
82e PHELPS CAMELBACK KEY (Right Side View
unmounted:(14KB)
82f PHELPS CAMELBACK KEY (Bottom View
unmounted:(21KB)
82g PHELPS CAMELBACK KEY (Serial Number on top
of base:(12KB)
82h PHELPS CAMELBACK KEY (W.U.TEL.CO Stamped on
top of lever:(18KB)
82i PHELPS CAMELBACK KEY (G.M.PHELPS MAKER Stamped
on left side of lever:(18KB)
83 VERY UNUSUAL AMERICAN TELEGRAPH CO. PHELPS
CAMELBACK KEY (G.M.PHELPS MAKER Stamped on left side of lever)
WITH SIDE MOUNTED SHORTING CONTACTS:(14KB)This Phelps
Camelback key is stamped AM. TEL. CO. on top of the lever. It has
an extremely unusual shorting switch with spring-loaded detent
and side mounted contacts. It was found mounted on a wooden board
with an early sounder of unusual design. The following photos show
all of the unusual aspects of the key:
83a A view of the Right side of the key showing
the unusually thick shorting lever:(17KB)
83b A view of the Left side of the key showing
the G.M.PHELPS MAKER Stamped into the lever:(14KB)
83c A closeup view of the side-mounted shorting
lever contacts in the open position showing the spring and roller
detent:(31KB)
83d A closeup view of the side-mounted shorting
lever contacts in the closed position showing the spring and roller
detent:(34KB)
83e A closeup view of the bottom of the key showing
the shorting lever mechanism in the open position:(33KB)
83f A closeup view of the bottom of the key showing
the shorting lever mechanism in the closed position:(33KB)
83g A closeup view of top of the lever showing
the AM. TEL. CO. stamp:(43KB)
83h A closeup view of left side of the lever showing
the G.M.PHELPS MAKER stamp:(46KB)
83i Right side of board with key & sounder as
found:(12KB)
83j Right side of board with key & sounder as
found:(12KB)
83k Side view of sounder found with key:(30KB)
85 ** PHELPS SOUNDER:(32KB)
This lovely early 1860's Phelps sounder is in the Pete Malvasi - W2PM collection.
86 * PHELPS SOUNDER - RELAY:(26KB)
This Phelps sounder was made as / or converted into a relay.
The upright post is insulated from the base and forms one of
the normally-open relay contacts while a hole in one
trunnion support with a set screw for a piece of wire forms
the other part of the circuit.(Traded to John Casale-W2NI)
87 * EARLY PHELPS/WESTERN UNION PLUG-STYLE TELEGRAPH
SWITCHBOARD:(18KB)
This switchboard allowed one telegraph set to be switched
into one of two incoming telegraph lines. Tapered brass plugs
completed the circuit. A lightning arrestor plate, separated
from the conductors by a small gap, shunted lightning strikes
to ground. The plate reads: W.U.TEL.CO., G.M.PHELPS.(Traded to
John Casale - W2NI.)
90 ** CIVIL WAR TELEGRAPH OPERATOR'S TOMBSTONE WITH
KEY AND TELEGRAPH POLE:(27KB)
This tombstone was erected in honor of James Francis Leonard of
Frankfort, KY. He was a telegraph operator during the Civil
War and is credited with having discovered that the sounds made by
a register as it impressed dot and dash marks on paper tape could
be copied by ear. This led to the widespread use of sounders
for copying the Morse code although many people still insisted
on a permanent paper tape record of the messages because they
did not trust copy-by-ear. In 2004, I was sent a photo of the base of
the tombstone showing the name 'Taylor'. I do not know the significance
of this name.
90a Closer view of the telegraph key and the
telegraph line insulator at the top of the pole:(20KB)
90b Closer view of the front of the tombstone:(32KB)
90c Closer view of the inscription:(48KB)
It reads: James Francis Loeonard. Born at Frankfort, KY.,
September 8th, 1934. Died at Columbus, Miss., July 29. 1862
aged 27 years, 10 Months and 21 Days. Called home by the Grand
"Chief Operator" To Work the "Eternal Circuit" Above.
90d Closer view of the telegraph key which is
probably a Hall Camelback:(32KB)
90e Closer view of the telegraph insulator:(14KB)
90f A different view of the tombstone showing the name
Taylor on the side of the base.
92 ** Photograph of Civil War Field Telegraph
Station:(39KB)This is one of the very few actual photographs of
a civil war field telegraph setup. You can see the large coils of the
relay quite clearly but the details of the key and other apparatus
are quite hard to make out even in the enlargement below.
92a ** Enlarged view of the telegraph set in
the Civil War Field Telegraph Station.:(55KB)
94 VISITING CARD PHOTOGRAPH OF A TELEGRAPH OPERATOR AND
TELEGRAPH SETS:
This photograph shows a telegraph operator and what appear to be two box
relay telegraph sets with perhaps Lewis keys.
96 ** OIL PAINTING OF CIVIL WAR ERA INDIANS BURNING
TELEGRAPH POLES:(37KB)This extraordinary oil painting depicts
two indians setting fire to two telegraph poles. This was one of
the reasons that it was difficult to maintain reliable telegraphic
communications across the country at that period in American history.
This painting is the property of collector Bob Fuschetto who
was kind enough to allow me to put this photograph of it in
my museum.
99 ** CIVIL WAR REENACTOR AND TELEGRAPH HISTORIAN ROBERT
FEENEY AND HIS CIVIL WAR TELEGRAPH STATION:
Robert Feeney has been displaying, demonstrating, and explaining Civil War
Telegraph Instruments at various Civil War Reenactments. Many of his
instruments are homemade and they all function perfectly. Notice the
batteries, key & relay set, register, sounder, switch, pocket set and portable
wire dispensing reel in his display. Here are a few more photographs of his
station taken in 2006.
99f ** Telegraph register made by Robert Feeney for his
Civil War Field Telegraph Station:
99h ** Telegraph Pocket Set made by Robert Feeney for his
Civil War Field Telegraph Station:
99s ** CIVIL WAR "U.S. MILITARY TELEGRAPH" -
TELEGRAM/MESSAGE FORM From Robert Feeney's display:(260KB)
This is the message form that was used for transcribing and delivering Civil
War Telegraph messages. It is provided courtesy of Robert Feeney. It may be
downloaded and printed on your printer. The original size is: 4-3/4 inches
wide by 7-3/16 inches high.
100 RARE MINIATURE W. HOCHHAUSEN CAMELBACK
KEY:(15KB)This tiny camelback key measures only 3-1/4 inches long.
It was manufactured in the 1870s by W. Hochhausen of New York.
100a Another view of the W. Hochhausen
Camelback key:(14KB)
100b A close-up view of the name on the W. Hochhausen
Camelback key:(18KB)
101 RARE MINIATURE W. HOCHHAUSEN CAMELBACK
KEY and MINIATURE S. H. HOGGSON SOUNDER:(23KB)This is the same model
of Hochhausen key shown above. It was found with a miniature sounder made
by S. H. Hoggson of New Haven, Connecticut. Additional pictures are shown
below:
101a Hochhausen Key and Hoggson Sounder with ruler for size
reference:(23KB)
101b Left side view of the key:(25KB)
101c Right side view of the key:(20KB)
101d Closeup of name on key lever:(24KB)
101e Key in hand for size reference:(27KB)
101f Key with ruler for size reference:(31KB)
101g Hoggson sounder (top view):(17KB)
101h Hoggson sounder (side view):(23KB)
101i Hoggson sounder (bottom view):(19KB)
101j Hoggson sounder (maker's label):(35KB)
102 * RARE W. HOCHHAUSEN WEIGHT DRIVEN REGISTER:(25KB)
This magnificent, unusual, and rare round-base Hochhausen register is owned
by collector VE3STN who gave me permission to display it in my museum.
102a * Another view of the HOCHHAUSEN
REGISTER:(31KB)
110 PARTRICK & CARTER LEG KEY:(16KB)
Very early step-down cast lever. Black Japanned finish w/gold
trim paint. Shorting switch.Spring adjuster.
111 * PARTRICK & CARTER LEG KEY:(16KB)
Similar to # 110. Very early step-down cast lever.
Black Japanned finish w/gold trim paint.
Shorting switch. Spring adjuster.
111a Another view of the Partrick & Carter
leg key:(19KB)
111b Another view of the Partrick & Carter
leg key:(19KB)
111c Another view of the Partrick & Carter
leg key:(16KB)
120 ** VERY EARLY SWEDISH SORENSEN WEIGHT-DRIVEN
EMBOSSING REGISTER:(60KB)
This is a very early Swedish weight-driven register made by Sorensen in
Stockholm, Sweden. The shape of the frame is very similar to the very
earliest of the German Siemens registers. The picture was provided by
Collector Jan Skoldin, SM5LNE.
120a ** A closer view of the Sorensen Label:(16KB)
125 VERY EARLY AUSTRIAN EMBOSSING REGISTER:(25KB) This is a very early Austrian embossing register. Before dots and dashes were inscribed on the paper tape in ink, embossing registers such as this one used a blunt stylus to emboss impressions into the tape. These long and short impressions were read by eye and transcribed into letters. The register is signed: CZEIJA & NISSL, WIEN (Vienna, Austria) Number 769.
130 * EARLY FREDERICK, PEARCE MORSE REGISTER:(12KB)
This lovely and unusual register was made by Frederick, Pearce & Co., of New
York probably in the 1870's. The coils are enclosed within the large,
elaborately decorated 9" x 12" iron base. It uses an ink roller
mechanism to mark the paper tape and has a lever-arm winding mechanism.
Frederick, Pearce of 77 & 79 John Street in New York were successors to
Pearce & Jones of 64-66 John St. who were established in 1872.
130a A closeup view of the ink-roller mechanism:(26KB)
130b A very closeup view of mechanism and label:(35KB)
130c A back view showing spring winding lever:(13KB)
130d Another back view showing spring winding lever:(13KB)
130e View of bottom of base showing the coils:(29KB)
130f Front of register with reproduction supply reel:(19KB)
130g Rear of register with reproduction supply
reel:(20KB)
135 EARLY BRITISH STELJES PATENT TYPE-PRINTING TELEGRAPH
REGISTER:(18KB)
This is a very unusual early dual weight-driven type printing telegraph
register. There are two large drums for the cord coming from the
two weights which provide the power to operate the register. It is not
clear how this device functioned but the two solenoid coils apparently
selected the character to be printed on a paper tape by arotating print
wheel.
135a A view of the Manufacturer's Label:(35KB)
135b A view showing the inner mechanism:(18KB)
140 WATTS CAMELBACK KEY:(30KB)
This interesting camelback key was made by Watts & Co. of Baltimore,
Maryland in the early 1870's. The lever is stamped WATTS & CO.
BALTO MD. The Shorting switch is stamped PAT.AUG 27, 72, and
consists of two strips of brass, lying over each other. Note that
the base is absolutely identical to that of a Phelps camelback.
140a The other side view of the Watts
Camelback:(31KB)
140b Top view of the Watts Camelback:(23KB)
145 WATTS MINIATURE CAMELBACK KEY:(15KB)
This miniature camelback key was made by Watts & Co. of Baltimore, MD
in the 1870's.
147 * VIADUCT KOB WITH MINIATURE CAMELBACK
KEY:(21KB)
This early KOB has a rather distinctive sounder and a miniature
camelback key which is identical to the Watts Miniature Camelback
Key seen as item 145.(The Derek Cohn WB0TUA Collection)
147a A Side view of the Viaduct KOB:(14KB)
148 * VIADUCT SPRING DRIVEN REGISTER:
This register marked a moving paper tape with the dots and dashes of the Morse
Code. It is labeled: VIADUCT, BOSTON.
148a * The other side of the Viaduct Register:
148b * End view of the Viaduct Register:
148c * The moving armiture of the Viaduct Register:
148d * The maker's stamp on the Viaduct Register:
150 EARLY TILLOTSON "ARCHED" CAMELBACK KEY: (40KB)
This Tillotson camelback has an unusual oval hard rubber base. The
brass arch over the trunnion from left to right was probably
designed to stabilize the uprights so they did not work loose in
the base. Label reads: L.G.Tillotson & Co. 8 Dey St., New York.
157 * VERY EARLY TILLOTSON CAMELBACK KEY: (25KB)
This lovely early Tillotson camelback key has a base which is identical
to that on the Number 57 Caton straight lever key
.. suggesting that there was some connection between Caton and Tillotson.
This great key is owned by Joe Schroeder, W9JUV.
159 MINIATURE TILLOTSON CAMELBACK KEY: (47KB)
Tiny brass-lever camelback key with 3-3/4" lever stamped Tillotson,
6 Dey St.New York, no spring adjusting screw, a lock screw on the steel
trunnion shaft, miniature knob, & brass base stamped 2048.
159a Another view of the Miniature Tillotson Cambelback
key: (56KB)
159b Another view of the Miniature Tillotson Cambelback
key: (47KB)
159c Another view of the Miniature Tillotson Cambelback
key: (32KB)
160 EARLY OTTOMAN EMPIRE TURKISH TELEGRAPH
KEY:(23KB)This early Turkish land-line telegraph key was found
in an antique store in Istanbul in 2003. The letters stamped into the bottom
of the base suggest that it was used during the Ottoman Empire.
160a Another View of the Ottoman Empire Turkish Key:
(23KB)
160b A View of the Turkish Key showing the letters on the
bottom of the base:(59KB)
161 * EARLY OTTOMAN EMPIRE TURKISH TELEGRAPH
KEY:(29KB)This early Turkish land-line telegraph key was found
but not purchased in an antique store in Istanbul in 2003. Its basic design
is quite similar to the design of # 160 above.
169 EXTREMELY EARLY GERMAN LAND-LINE CAMELBACK
KEY:(31KB) This is a very early German Camelback key although
the next key in the museum, number 170, is clearly much earlier.
169a Another view of the Camelback Key:(34KB)
170 EXTREMELY EARLY GERMAN LAND-LINE CAMELBACK
KEY:(14KB) This is one of the very earliest German Camelback keys
that I have ever seen. I believe that it dates to the early 1850's
based on my research in the Siemens and Deutches Museum Archives
in Munich. I believe that the number stamped on the side of the key is
either a part number or the date in which it was placed in service.
I have included several different views of the key.
170a Another view of the Camelback Key:(15KB)
170b Another view of the Camelback Key:(14KB)
170c Another view of the Camelback Key:(18KB)
170d Another view of the Camelback Key:(27KB)
170aa ANOTHER EXTREMELY EARLY GERMAN LAND-LINE CAMELBACK
KEY:(15KB) This is similar to the one above but perhaps slightly
later.
170ab Another view of the extremely early German Camelback
Key:(13KB)
171 * VERY EARLY GERMAN LAND-LINE CAMELBACK KEY:(15KB)
Lovely very early German camelback land-line key with the flat, non-
adjustable spring and the heavy brass camelback lever that was
characteristic of the earliest German telegraph keys.
172 * EARLY GERMAN LAND-LINE CAMELBACK KEY:(19KB)
Nice early German camelback land-line key with the flat, non-
adjustable spring and the heavy brass camelback lever that was
characteristic of early German telegraph keys.
173 * LATER MATCHED GERMAN LAND-LINE
CAMELBACK KEYS:(19KB)
These two keys were mounted side-by-side on a single piece of wood.
The keys are numbered 1 and 2. The heavy camelback levers are
similar to those of early camelback keys but these keys were made
around the turn of the century.
173a A closer view of one of the German
camelback keys:(14KB)
174 EARLY GERMAN LAND-LINE CAMELBACK KEY FROM CZECH
REPUBLIC:(19KB)
Nice early German camelback land-line key with the flat, non-
adjustable spring and the heavy brass camelback lever that was
characteristic of early German telegraph keys. This one was used
in the Czech Republic.
174a Another view of the German/Czech Land line
key:(22KB)
175 VERY EARLY GERMAN LAND-LINE FLAT
SPRING PIVOT KEY:(18KB)
Delicate key with flat spring/pivot (Like a Steiner key) at end of
the 3-3/4" lever. Early Ivory knob and normally open and normally
closed contacts. Books show this to be circa 1840s.
176 VERY EARLY GERMAN LAND-LINE SEMI-CAMELBACK FLAT
SPRING KEY:(34KB)This is an early German land-line key with a very
unusual lever design. It uses the very early flat spring design to hold
the lever up.
176a Another view of the German key:(36KB)
177 EARLY GERMAN LAND-LINE CAMELBACK KEY:
Nice early German camelback land-line key with the flat, non-
adjustable spring and the heavy brass camelback lever that was
characteristic of early German telegraph keys.
177a Another view of the German Land line
camelback key:
180 * EARLY FRENCH KEY, REGISTER, AND
BELL PRACTICE SET:(17KB)
This is an early French practice set consisting of a small
telegraph key, an electrically operated bell, and a register
which scribed impressions of dots and dashes into a moving
paper tape.
180a Another view of the French practice
set:(16KB)
181 EARLY GERMAN BRASS LEVER CAMELBACK
PRACTICE KEY:(18KB)
Small 3-3/4" brass lever with camelback curve and upward pointing
end leading directly into knob. An early flat spring provides
the tension. This design is typical of most of the early Prussian
land-line keys. These keys were used with early German telegraph
practice sets as shown below which are the German equivalent of the
American Bunnell Camelback key and sounder practice sets.
182 * EARLY GERMAN TELEGRAPH SET: KEY, REGISTER,
RELAY:(13KB)
This simple practice set is the German equivalent of the American
Bunnell Camelback key and sounder practice sets. The simply-made key
follows the classic lines of the earliest Prussian Camelback keys.
The register is also of very simple design. The paper tape is simply
pulled through the register by hand. The relay, although simply made,
is patterned after the earliest Prussian relays.
182a * ANOTHER EARLY GERMAN PRACTICE REGISTER:(23KB)
This is another variant of the very simple, hand-operated design.
182b CATALOG ILLUSTRATION OF COMPLETE EARLY GERMAN
PRACTICE SET:(22KB)
This illustration shows a box containing a complete German practice
set consisting of 2 glass batteries, 2 keys, 2 registers, and 2
rolls of wire. The catalog was published in 1910/1911 by
Edmund Prandstatter of Munich, Germany. It is interesting to note
that registers were still being produced and sold at this late date
in Germany while Americans had abandonned registers in favor of
copying code by ear from sounders around the 1860's. It is also
interesting to note that there are NO sounders offered for sale
anywhere in the catalog !!
182c CATALOG ILLUSTRATION OF ANOTHER GERMAN
PRACTICE SET:(15KB)
This practice set from the above catalog included a more complex
spring-driven register which pulled the paper tape automatically.
182d * Another GERMAN PRACTICE REGISTER:(15KB)
182e * Another GERMAN PRACTICE REGISTER:(15KB)
182f * Another GERMAN PRACTICE REGISTER:(15KB)
183 VERY EARLY GERMAN CAST LEVER CAMELBACK KEY:(25KB)
Massive 4-3/4" long cast lever with the classical Prussian
camelback shape. An early flat spring provides the tension.
Normally open contacts only.
185 UNUSUAL EARLY GERMAN CAMELBACK KEY:(15KB)
Small 4-1/4"Camelback lever with unusual upward pointing end leading
directly into knob. Key is pivoted on far end and has coil spring.
Black 3-1/2x2-1/2 base stamped: E.ZIMMERMAN, LEIPZIG. This key was
sold for use in scientific experiments as well as for telegraph.
0187 EARLY GERMAN 'SIEMENS' KEY, REGISTER, & GALVANOMETER
(KROB) SET:(16KB)
This set is a typical example of an early European land-line telegraph system
consisting of a straight-lever German key, an ink writing register,
and a galvanometer for measuring the condition of the line. A roll
of paper tape on which the dots and dashes were written (in ink)
is stored in the drawer under the register.
This set was manufactured by Siemens.
0187a ANOTHER VIEW OF THE SIEMENS SET:(20KB)
0187b ANOTHER VIEW OF THE SIEMENS SET:(17KB)
0188 EARLY FRENCH KEY, REGISTER, & GALVANOMETER
(KROB) SET:(21KB)
This set is a typical example of the early European land-line telegraph
systems which consisted of a straight-lever German-design key,
an ink writing register, and a galvanometer for measuring the
condition of the line. It is called a ''KROB'' set which stands for:
Key and Register on Base. A roll of paper tape on which the dots and
dashes were written (in ink) is stored in the drawer under the register.
This set is stamped with the French manufacturer's name but the
design of the key and register are clearly Siemens.
The name stamped on the set reads: Societe Industrielle des Telephones,
25 Rue du 4 Septembre, Paris. I believe that the set was probably
originally manufactured or certaily licensed by Siemens.
NOTE the interesting telegraph key which has the characteristic
German Siemens spring-mounted lower contacts AND surprisingly, it has
two tension springs. One spring is mounted in front of the trunnion
and one spring is mounted in back of the trunnion. It is unclear
why the spring in back of the trunnion was needed.
The only other two-spring key that I have been able to find is
listed in the Spark and Radio keys' and the 'German Military keys'
sections of this museum.
The following views of this set allow you to see all of the
important details.
0188a Another angled view of the French set:(21KB)
0188b Another angled view of the French set:(22KB)
0188c A view of the French set with paper drawer
open:(19KB)
0188d A close up view of the galvanometer on the French
set:(8KB)
0188e A close up view of the name stamped into the
French set:(12KB)
0188f A close up view of contacts and dual springs of
the (German-origin) telegraph key on the French set:(14KB)
0188g A key that is similar to that
has the same dual springs as those on the above set:(25KB)
0189 * EARLY GERMAN 'WETZER' KEY, REGISTER, & GALVANOMETER
SET:(17KB)
This set is a typical example of a land-line telegraph system
consisting of a straight-lever German key, an ink writing register,
and a galvanometer for measuring the condition of the line. This
one is somewhat later than number 0187 and the black meters were
probably added later than it's first date of manufacture. It
was manufactured by H. Wetzer, Pfronten Bayern.
0189a Another view of the wetzer set:(17KB)
0189b Another view of the wetzer set:(17KB)
0189c Another view of the wetzer set:(18KB)
0189d Another view of the wetzer set:(17KB)
190 LARGE WESTERN UNION TRANSATLANTIC CABLE KEY:(51KB)
Two large old brass levers mounted on a 4-1/2x6" black rubber base.
The left lever was used to send dots. Pressing it drove the cable
voltage positive. The right lever was used to send dashes and drove
the cable negative. Since the cable was thousands of miles long,
it acted as a huge capacitor and the full plus-to-minus voltage was
necessary to help it discharge. The messages were recorded on a
moving paper strip and it took skill to visually tell the difference
between dots & dashes.
0190a Another view of the WU Cable Key:(37KB)
0190b Another view of the WU Cable Key:(37KB)
0190c Another view of the WU Cable Key:(37KB)
0190d A view of the bottom of the base of the
WU Cable Key:(37KB)
192 LARGE ELLIOTT BROTHERS TRANSATLANTIC CABLE
KEY:(51KB)This is a very fine example of an early submarine cable key. It
has survived in very good condition and shows a plethora of adjustments that
allow it to be set to the exact tension and spacing desired by an operator.
The left lever was used to send dots. Pressing it drove the cable voltage
positive. The right lever was used to send dashes and drove the cable
negative. Since the cable was thousands of miles long, it acted as a huge
capacitor and the full plus-to-minus voltage was necessary to help it
discharge. The cable messages were usually recorded on a moving paper strip
and it took skill to visually tell the difference between dots & dashes.
This key, however, was used with the super-sensitive relay shown below
instead of the typical paper tape recorder.
192a Another view of the Elliott Brothers Cable key:
(41KB)
192b Another view of the Elliott Brothers Cable key:
(41KB)
192c Another view of the Elliott Brothers Cable key:
(41KB)
192d Another view of the Elliott Brothers Cable key:
(41KB)
192e Another view of the Elliott Brothers Cable key:
(41KB)
192f A close view of the Victor-Patent-like pivots on
the Elliott Brothers Cable key: (41KB)
192g A close view of the maker's name on the Elliott
Brothers Cable key: (41KB)
192h The underside of the base of the Elliott Brothers
Cable key: (41KB)
193 SUPER-SENSITIVE POLAR RELAY USED IN SUBMARINE
TELEGRAPH CABLE LINES:(70KB)The electrical signals on a submarine
telegraph cable were usually recorded on a moving paper tape and then
translated into letters by eye. This relay has the extremely high resistance
of 506 Ohms, making it sensitive enough to detect the very small voltage
changes in a submarine cable. In addition, it has numerous very fine
adjustments that allow it to be set to react to very weak signals such as
thouse received over very long cables. There is some engraved writing on the
top of the relay but I have been unable to read it because it is not engraved
deeply enough into the metal. This relay was located along with the
Elliott Brothers Submarine Telegraph Cable Key shown above and was probably
also made by Elliott Brothers.
193a A close view of the contacts on the super-sensitive
submarine telegraph cable relay:(50KB)
193b A close view of the sensitive magnets underneath the
submarine telegraph cable relay:(50KB)
193c Another view of the submarine telegraph cable
relay:(50KB)
200 UNUSUAL ELLIOTT BROTHERS "UNIGRAPH"
POCKET KEY AND SOUNDER: (20KB)
This tiny set is carried in a small leather case. It consists of a
2 inch diameter brass cylinder 1-1/2 inch high. A tiny key protrudes
from the side.
200a The circular disk (24KB) on the
top pivots forward to make a clicking sound when the
200b coils (22KB) are activated.
200c The top is engraved (30KB):
The "Unigraph" Designed by
T. A. Bullock and A. C. Brown Elliott Bros., London. No 125.
201 * UNUSUAL MINIATURE BRITISH STRAIGHT LEVER KEY: (13KB)
This miniature key was probably made by Elliott Brothers.
201a Closer view of the miniature British straight key:
(14KB)
201b Another closer view of the miniature British
straight key: (12KB)
203 WESTERN ELECTRIC LINEMAN'S POCKET TEST SET:(27KB)
Similar to #205 but tiny camelback-style key has lever stamped
Western Electric Co. Chicago.
203a Another view of W.E. pocket set:(24KB)
205 TILLOTSON LINEMAN'S POCKET TEST SET:(50KB)
These hard-to-find sets were used by early linesmen and Civil War telegraph
operators and spies to carry to the top of telegraph poles & tap into the
telegraph lines for testing, espionage, and sending/receiving messages.
Consists of a lovely oval hard rubber case with engraved top 4-1/2" long by
2" wide. Inside is a tiny key with 1-1/2" lever and a sounder with sensitive
horizontally mounted coils.
205a Another View of the Pocket Set:(53KB)
205b Key End View of the Pocket Set:(36KB)
205c Sounder End View of the Pocket Set:(38KB)
205d Pocket Set and Sharps 4-barrel pistol in Civil War
espionage setting:(56)
206 BUNNELL LINEMAN'S POCKET TEST SET:(34KB)
Tiny sounder integrated with tiny key on black base.
210 POSTAL TELEGRAPH COMPANY POCKET TEST
SET:(13KB) This very small set was made by The Postal Telegraph
Company and used by the military in the Spanish-American war and others.
210a Opening the cover reveals the key
mechanism:(13KB) and the sounder armiture.
210b The removal of the entire front cover:(12KB)
shows the coils for the sounder and the "Skirrow patented"
rack-and-pinnion device that adjusts the coil-to-armiture distance.
212 COMPLETE PORTABLE WESTERN UNION TELEGRAPH
OFFICE:(17KB) This is a complete portable 1870's Telegraph office.
It is contained in a special box which serves as a desk and which can
be attached to a telegraph pole.
It was carried in a railroad car and used for emergency communications
along the railroad line. This is a very interesting set so I have included
many different views of it and it's components. Several views are
very similar to each other but have slightly different color balance.
As you can see, the set can be attached to any convenient telegraph
pole using a chain attached to the back of the cabinet.
It can be electrically hooked into any telegraph line using the
special connector called a 'Wrecking Clamp'. A blueprint shows the
wiring of many of the telegraph poles along the railroad line so the
telegraph operator can know which line to tap into.
The following views and descriptions should explain the operation
of this unusual set...
0212a A similar but slightly closer view of the set
with an operator:(18KB)
0212b A view of the front of the set without the
operator:(14KB)
0212c A similar view of the front of the set without
the operator:(15KB)
0212d A view of the back of the set showing how
it is chained to the telegraph pole:(23KB)
0212e A view of the front of the set with the
cover/desk closed:(11KB)
0212f A view of the back of the set showing the
wooden saddles and the chain for mounting the set to the telegraph pole:
(11KB)
0212g A view of the front of the set with the cover/desk
open:(11KB)
0212h A different view of the front of the set with the cover/desk
open:(11KB)
0212i A closer view of the front of the set with
the cover/desk open:(17KB)
0212j A still closer view of the front of the set with
the cover/desk open:(19KB)
0212k A view of the blueprint showing the wiring of
the different telegraph poles along the various sections of track:
(10KB)
0212kl A MUCH higher resolution view of the blueprint:
NOTE This is a BIG, SLOW-LOADING 135KB file! :(135KB)
0212l The sensitive Western Union Box Relay
Key and Sounder with the magnificent Lewis key:(14KB)
0212m The lovely Lewis telegraph key:(15KB)
0212n The adjustments for the sensitive sounder
part of the instrument:(14KB)
0212o The label on the telegraph set reads:
''PATENTED OCT. 12, 1871, W.U.TEL CO'' and number C540 is stamped
into the wood:(16KB)
0212p The ''Wrecking Clamp''. This clamp was
tightened over a telegraph wire and then the wire was cut. The
terminals on the clamp allowed electrical connections to be made
to each of the severed ends and the switch on the clamp allowed
the two severed ends to be electrically reconnected:(12KB)
217 * VERY SMALL EARLY BRASS LEG KEY:(15KB)
A tiny brass leg key with heavy lever and pressed-in steel trunnion.
218 VERY SMALL EARLY NICKEL-PLATED BRASS LEG KEY:(43KB)
A tiny nickel-plated brass leg key with a heavy lever and a
pressed-in steel trunnion.
218a Another view of the tiny key:(33KB)
218b Another view of the tiny key:(32KB)
218c A view of bottom of the tiny key:(30KB)
215 Another view of the tiny key:(16KB)
215a Another view of the tiny key:(16KB)
220 GRAY & BARTON LEG KEY:(24KB)
Lovely very early square brass lever bent down slightly toward knob
and stamped "GRAY & BARTON, CHICAGO". Trunnion is nicely machined
steel held in place by a setscrew. Very early design with no spring
adjusting screw (a refinement invented by Phelps in the 1860s). Short
brass shorting lever pivoted under trunnion. Cast brass base stamped
"828". 2 tapered SMOOTH brass legs extend down 2" & end in brass-screw
wire binding posts. ca. 1860s.
221 R. HENNING "MAKER" SOUNDER:(38KB)
Very early all brass sounder used with 220 above. armiture stamped
R.HENNING, MAKER on side & W.U.TEL.CO on top. Very early design.
221a * R. HENNING "MAKER" SOUNDER: As above. Traded to Roger Reinke.
222 Western Union / Grey & Barton Key:(24KB)
Same as 220 with Nickel-plated lever, unstamped,base stamped"416".
Spring adj screw. ca. 1860s.
223 * JAMES PARTRICK BRASS KEY AND SOUNDER:(24KB)
Lovely and delicate all brass key similar in design to #110 with
matching sounder >K9WDY
224 PARTRICK & CARTER "ARCH" KEY & SOUNDER:(47KB)
This large set has an extremely unusual
224a Partrick & Carter step-lever
key with a lovely brass arch over the
trunnion:(55KB).
224b This view shows the front of the key:(22KB)
225 BRASS STEP-LEVER KEY & SOUNDER ON WOODEN BASE:(32KB)
Masive brass lever key with steel shaft, japanned base, and early
step-down lever design on wooden base with Black Japanned base sounder
with gold lettering "PATENTED FERY 16,1875".
225a CLOSE-UP OF BRASS STEP-LEVER KEY:(16KB)
227 CLASSIC LEWIS PATENT KEY: (36KB)
This is one of the more frequently seen versions of the Lewis Key
which is the only key that was granted a patent exclusively based on
the beautiful design of the key rather than any innovative electrical
or mechanical attributes.
227a Another view of the LEWIS KEY: (36KB)
228 VERY UNUSUAL FLAT-LEVER LEWIS PATENT KEY: (33KB)
This is one of the most unusual Lewis keys. It has a flat steel lever
instead of a nickel-plated brass lever and the pivot points are at the
far end of the lever.
229 MINIATURE LEWIS KEY BOX RELAY/SOUNDER: (38KB)
This is an unusually small so-called box relay with a boxed sounder/relay and a
lewis key on a wooden base. It is not clear why it was made in such a small
size.
229a A closer view of the key: (37KB)
229b A closer view of the relay/sounder: (44KB)
230 LEWIS / WESTERN UNION TELEGRAPH SET:(25KB)
This unusual set consists of a lovely brass LEWIS key mounted
perpendicularly across a 12inch long wooden base which is mounted on a
gold pin striped black cast iron base. To the left of the LEWIS key is
an unusual sounder and to the right of the LEWIS key is a line relay
of unusual design. The adjusting string/spring for the relay passes
over the top of the LEWIS key from right to left to an adjusting knob.
The relay is engraved W.U. TEL. CO. on the brass base and OHMS 153 on
one brown coil cover. The key is engraved "LEWIS PAT May 25, 1875 May
23, 1876 on top of the lever and "W. E. MFG. CO. CHICAGO" on the side
of the lever. Bottom of base signed in ink: J.F. Putnam, July 10/80.
230a Another View of the Lewis/WU Set:(47KB)
232 EXTREMELY UNUSUAL STRAIGHT LEVER FLAT TERMINAL LEWIS
KEY:(16KB) This is the strangest Lewis Key that I have ever seen.
The lever is nearly straight which is unusual for Lewis keys but
the most unusual aspect of the key is the three flat-topped terminals
which, as you can see from the underside view connect to the
normally open, normally closed, and frame of the key.
There is no way to connect wires to these terminals directly so
I can only assume that the key was slid into some sort of spring
loaded contact assembly. I have included several different views
of the key.
232a Another view of the Flat Terminal Lewis
Key:(15KB)
232b Another view of the Flat Terminal Lewis
Key:(25KB)
232c A view of the bottom electrical connections
of the Flat Terminal Lewis Key:(18KB)
233 ** EXTREMELY UNUSUAL LEWIS CAMELBACK
KEY:(21KB) This is a very unusual Lewis patent key with a
camelback lever. Most Lewis keys have a gently sloping lever
which paved the way for virtually all subsequent key designs.
This key is owned by collector: Gray Marshall KQ6MW..
233a * ANOTHER VIEW OF THE CAMELBACK LEWIS
KEY:(21KB)
234 LEWIS KEY: (15KB)
This is one of the more frequently seen versions of the Lewis Key.
It is described more fully in the write-up of the key below.
234a Another view of the LEWIS KEY: (16KB)
235 LEWIS KEY: (78KB)
This all-plated Lewis key is an example of the early Lewis designs
which did not include adjustments for side-play in the trunnion. The
Lewis key patents referred to the unique and ornate design of the key rather
than any distinguishing mechanical attributes. Stamped: LEWIS PAT.
May 25, 1875, May 23, 1876 on top of lever and W.E.MFG CO. Chicago on
side of lever..
ROTATING VIEW OF #235 LEWIS KEY: (202KB)
This is a VERY LARGE FILE that takes a long time to load but
it results in a view of a rotating Lewis Key. It is an experiment
to see whether it would be a practical way to show many sides
of the same key.
236 RAILROAD LEWIS KEY AND LEWIS CAMELBACK
SOUNDER:(14KB) This is a classic Lewis Key with an unusual
Lewis Camelback Sounder. The Key and Sounder were apparently
used on the railroad because each is marked NPRR. The key is marked
J-165 and the Sounder is marked J-166. I have included several
different views of the set.
236a A closer view of the Lewis Key:(11KB)
236b A closer view of the markings on the
Lewis Key:(9KB)
236c A closer view of the markings on the3
Camelback Lewis Sounder:(18KB)
237 LEWIS KEY AND SOUNDER:(16KB)
Lewis key like 0235 with hard-to-find Lewis sounder.
238 * LEWIS KEY AND SOUNDER 'PRIVATE LINE' CAST-BASE KOB
:(16KB) This Lewis Key and Sounder have their bases cast into
the cast iron base of this 'private line set'. Private line sets such
as this were used in private residences and in businesses to
communicate within the bruiding. (Same as item 275.)
238a Closer view of the cast-base Lewis
Key:(16KB)
239 LEWIS KEY KOB:(17KB) This is an
all brass Lewis Key mounted on a wooden base with an early
horizontal spring sounder.
239a Another View of the LEWIS KEY KOB:(41KB)
240 EARLY LYMAN PATENT KEY: (19KB)
This key shows the unique Lyman patent design with the lever suspended by a
"y" shaped piece of spring steel.
240a Another view of the EARLY LYMAN KEY: (19KB)
240e UNUSUAL AND EARLY NICKEL PLATED LYMAN PATENT
KEY:(26KB)
This is the first Nickel plated Lyman key that I have seen. It shows the
unique Lyman patent design with the lever suspended by a "y" shaped piece of
spring steel.
240f Another view of the Nickel Plated Lyman
Key:(28KB)
240g Another view of the Nickel Plated Lyman
Key:(30KB)
240h Another view of the Nickel Plated Lyman
Key:(25KB)
240i A view of the bottom of the Nickel Plated Lyman
Key:(31KB)
241 EARLY NICKEL-PLATED VICTOR PATENT LEGLESS KEY:(27KB)
This lovely nickel-plated brass key shows the "Victor patent" knife-edge
bearings. Rather than using a pinnion shaft, the key pivots on a knife-
edge.
241a A slightly different view of the Victor
Key:(30KB)
243 * VICTOR PATENT LEG KEY:(17KB)
This lovely brass key shows the "Victor patent" knife-edge bearings.
Rather than a pinnion shaft, the key pivots on a knife-edge.
The legs attach the key to the operating table and also
provide connections for the electrical wires.
243a Close-up view of Knife-edge pivot:(24KB)
245 * TILLOTSON KOB WITH TILLOTSON-VICTOR KEY:(17KB)
This lovely brass key shows the "Victor patent" knife-edge bearings.
It is stamped: Pats Dec 26, 1882. Both are stamped: L.G.Tillotson,
5 & 7 Dey St. New York. The base is stamped:
20 Ohms, L.C.T. & co. 8 Dey St.,N.Y.
248 * TILLOTSON CAMELBACK KOB:(15KB)
This is a nice example of a Tillotson Camelback KOB.
I have included several different views of the set.
248a Another view of the Tillotson Camelback
KOB:(15KB)
248b Another view of the Tillotson Camelback
KOB:(14KB)
250 GREELEY / TILLOTSON CAST-LEVER CAMELBACK KOB:(43KB)
'KOB' stands for 'Key (and sounder) on base'.
Gold-painted early camelback key with cast iron lever, shorting switch
& matching sounder on wooden base which is engraved E.S.GREELEY & Co.
Successors to L.G.TILLOTSON & Co. New York.
Too early for spring adjusting screws.
250aa GREELEY / TILLOTSON BRASS-LEVER CAMELBACK
KOB:(41KB)Early camelback key with brass lever, shorting switch
& matching sounder on wooden base which is engraved E.S.GREELEY & Co.
Successors to L.G.TILLOTSON & Co. New York.
Too early for spring adjusting screws.
251 * BUNNELL CAST-LEVER CAMELBACK KOB:(40KB)
Made by Bunnell around 1860s. Cast-Iron Lever Camelback Key originally
painted gold to look like brass. Like number 250 above on unmarked base.
252a * BUNNELL CAST-LEVER CAMELBACK KOB:(27KB)
As above on base stamped 20 ohms. J. H. Bunnell.
254 BUNNELL CAMELBACK KOB:(42KB)
Made by Bunnell around 1860s. Like 252a above with black-painted
camelback key mounted on unmarked base. The
sounder is mounted on a large thin brass plate. An interesting
spring-adjusting screw was added by a railroad operator in 1945.
259 * MINIATURE CAMELBACK KOB:(50KB)
About 3/4 size mini cast-iron-lever camelback key & small sounder on
wooden base. No identification but all painted black with fine gold
flower patterns on key & sounder.Too early for spring adj screw.
260 BUNNELL BRASS-LEVER CAMELBACK KOB:(73KB)
Early brass lever camelback key with steel trunnion and shorting
switch and black and gold painted sounder on wood base stamped
20 Ohms, J.H.Bunnell & Co., New York.
260aa BUNNELL BRASS-LEVER CAMELBACK KOB:(43KB)
Similar to 260 above:
261 BUNNELL BRASS-LEVER CAMELBACK KOB:(44KB)
Early brass lever camelback key with steel trunnion and shorting
switch and black and gold painted sounder on unmarked wood base.
261aa * Another BUNNELL BRASS-LEVER CAMELBACK KOB:(47KB)
Similar to above. This key is now on display in the National Cryptological
Museum of the NSA in Baltimore, MD.:
261b * The Bunnell Brass-Lever Camelback KOB as it
appears in the NSA National Cryptological Museum:(80KB)
262 * REDDING BRASS-LEVER CAMELBACK KEY KOB with brass-Lever key, on a
cast iron oval base frame with a shorting switch. Key has spring
adjusting screw. Mounted on wooden base which is engraved
JEROME REDDING & Co BOSTON, MASS - 4 ohms Pat
April 3D '77. Small piece of base back missing.>>W2PM
264 * REDDING BRASS-LEVER CAMELBACK KEY KOB. As above.
No patent date or shorting switch.
266 EARLY UNKNOWN BRASS-LEVER CAMELBACK-KEY KOB:(41KB)
Brass-lever camelback key with steel trunnion shaft, no spring adjusting screw,
& brass shorting lever. All cast iron sounder. Both key and sounder have
unusual bulges where trunnion shafts pass through. This is probably
a Redding as above.
270 EARLY CAST-BASE TILLOTSON STRAIGHT-LEVER KEY
PRIVATE-LINE KOB:(47KB)This private line KOB has a brass Key with
a straight brass lever, steel trunnion shaft, spring adjusting
screw, and brass shorting lever. The base is very heavy cast iron with
a sounder stamped "BUNNELLS PATENT JULY 1874 No737" on the heavy brass
armiture. These sets were often used in private residences in the 1870's.
270a Another view of the Private Line KOB:(44KB)
270b A closer view of the Bunnell Patent
notice:(35KB)
270.gif Another view of the Private Line KOB:(53KB)
271 * CAST-BASE WESTERN ELECTRIC PRIVATE-LINE KOB:(23KB>
Black cast-iron base with the Western Electric key that has two
parallel rods as its lever.
271#2 CAST-BASE WESTERN ELECTRIC PRIVATE-LINE
KOB:(20KB)Identical to number 271.
272 VERY EARLY L.G.TILLOTSON ALL
BRASS KEY AND "APRIL-FOOL" SOUNDER KOB:(59KB)
The key is a straight brass lever stamped L.G.TILLOTSON, 8 Dey St.,
New York. with no spring adjusting screw and a steel trunnion The
sounder has two coils in line from front to back but the armiture is
pivoted at the top center of one of the coils which can't possibly
make any contribution to the operation of the sounder. (Did they not
know this?) Sounder armiture stamped Patent App'd For. Wooden base
stamped 6 Ohms, L.G.T. & Co. 8 Dey St. N.Y. Patented June 24, 1873.
273 ** VERY EARLY L.G.TILLOTSON ALL
BRASS KEY AND REDESIGNED SOUNDER KOB:(46KB)This
set appears to have been designed after Tillotson realized
the error in the design of the ''April-Fool'' sounder shown
above in item 272. The sounder now has both of the magnet coils
pulling on the armiture. This set is labeled BLISS TILLOTSON and
a pencilled-in address on the bottom shows that it was manufactured
at 54 South 4th Street in Philadelphia where the company moved
in 1874 which was the year after the above set was patented.
273a ** Closer views of the key and
name:(51KB)
273b ** Closer view of the sounder and
address:(60KB)
274 UNUSUAL ROUND TRUNNION FRAME KOB:(34KB)
This is a very unusual early KOB with both the sounder and
the key frame designed as circles. The maker is not known.
274a A Close view of the tiny key:(44KB)
274b A Close view of the sounder:(45KB)
274c Another view of the KOB:(27KB)
274d Another view of the KOB:(27KB)
274e Another view of the KOB:(33KB)
274f A View of the underside of the base:(39KB)
275 * CAST-BASE LEWIS KEY PRIVATE-LINE KOB:(21KB)
This set has a Lewis-patent key and a Lewis sounder with their bases
cast as integral parts of the large cast iron base. The lever of the
key is stamped: Lewis Pat. May 28, 1875, May 26, 1876 on top and
Western Electric Co. Chicago on the side. (Same as item 238.).
275a Closer view of Lewis Key:(21KB)
278 * VERY EARLY CHARLES WILLIAMS (Boston)
CAMELBACK KEY: This is a fine example of the camelback keys made
by Charles Williams in Boston. This camelback key was probably made after
the next two Williams keys.
278a * The other side of the Williams key:
279 VERY EARLY CHARLES WILLIAMS (Boston) KEY:(30KB)
Early brass straight lever key mounted on a wooden base with the Williams
name stamped into the base.
279a Another View of the Williams Key:(29KB)
279b Another View of the Williams Key:(32KB)
279c Another View of the Williams Key:(23KB)
279d Another View of the Williams Key with the lever
removed:(48KB)
279e A view of the name stamped into the base of the
Williams Key:(51KB)
279f A view of the name stamped into the base of the
Williams Key:(50KB)
279g A view of the bottom of the base of the
Williams Key:(50KB)
280 * VERY EARLY CHARLES WILLIAMS (Boston)
KEY & SOUNDER:(36KB)
Early brass straight lever key and extremely early sounder mounted on
a wooden base. Sounder design suggests that it is circa 1850's.
Traded to W2PM
281 VERY EARLY AND UNUSUAL 'PUTT' NON-ELECTRIC
PRACTICE SET:(36KB)This set is very similar to the Charles
Williams Set listed as number 280. It has, however, no electric
mechanism. Pressing down on the key operates a long metal bar hidden
under the base which, in turn, pulls down the sounder. Each time the
key is pressed, therefore, the sounder makes a clicking sound. The
set was used for code practice without the need for batteries.
The wooden base is stamped: PAT'D MAY 31.70 D.W.PUTT & Co.
WELLSVILLE.O
285 VERY EARLY JAMES CLARK (Philadelphia)
CAMELBACK KEY & BOX SOUNDER:(35KB)
Very unusual camelback key with pull-down spring at far end and
Prussian-like upswept lever mounted on wooden base with early
wooden box sounder. Circa 1850s.
285a Closer view of key:(48KB)
This view shows the shape of the lever and placement of the spring.
285b Side view of key showing curvature:(25KB)
285c Another side view showing curvature:(57KB)
298 SOUNDER D'EXERCICE:(56KB)
Unique old miniature wooden resonator on pedistal with wooden key
pivoted at base. Key mechanically connected to a bar which strikes
an anvil inside the resonator making clicking sounds for practicing
sending & receiving. Marked:SOUNDER D'EXERCICE,Alban La FON,EVEREUX.
Signed R.Guillet,PTT twice.
315 BUNNELL NON-ELECTRIC PRACTICE SET:(39KB)
Brass, horizontally-mounted sounder lever with small telegraph key
knob attached directly to it. It was used to provide practice
clicking sounds for people learning the Morse code without the
need for batteries and wiring. Japanned, pinstriped frame on wooden
base. Original box & stamps.
325 BUNNELL ARTICULATED NON-ELECTRIC PRACTICE
SET:(15KB)
Interesting combination of a brass sounder and telegraph key
with a mechanical connection whereby pressing the key causes
the sounder to move downward to make a click. It was used to provide
practice sounds for people learning the Morse code without the need
for batteries and wiring.
325a EARLY BUNNELL LOGO STAMPED INTO BASE:(22KB)
405 KNUDSEN MORSE REGISTER:(62KB)
Made by Cornelius Knudsen in Denmark. - circa 1850 Before it was
discovered that the Morse code could be copied by ear, "Registers"
were used to print the characters on a paper tape for later
transcription. These spring powered Registers continued to be used
because they were thought to be more reliable than sound copy and
because they made a permanent record. This is a very early brass
register with an unusual armiture which presses the paper tape up
against the (missing) pen to mark dots or dashes on the tape in
ink. It has a key wound mechanism (with key) which runs
constantly.
650 * EARLY L.G.TILLOTSON SOUNDER:(17KB)
Early all brass frame with brass armiture stamped
L.G.Tillotson, 8 Dey St. New York with steel trunnion crimped
into brass armiture. Horizontal adjusting spring.
Wooden base. Notice the box-like anvil. It is similar to the
Williams Sounder (Number 280) and the Putt practice set sounder
(Number 281) seen above although those anvils were mounted on
a single upright post.
650a A view of the other side of the
sounder:(16KB)
685 * VERY EARLY L.G.TILLOTSON SOUNDER: Very early all brass frame with
brass armiture stamped L.G.Tillotson, 26 Dey St. New York with steel
trunnion crimped into brass armiture. Horizontal adjusting spring.
Wooden base.
690 UNUSUAL VERY EARLY ROUND
L. G. TILLOTSON SOUNDER:(29KB)
Ornate brass design with brass armiture stamped L.G.Tillotson, 8 Dey
St. New York, with steel trunnion crimped into brass. Horizontal
adjusting spring. All mounted on ROUND plated brass base.
691 * VERY EARLY TILLOTSON SOUNDER: Medium size, all-brass sounder in
excellent condition. Armiture is stamped "L.G.TILLOTSON & Co. 5&7 Dey
St. New York." and "Pat'd Feb 16, 1875". Base is also stamped TILLOTSON
and same address.
692 * VERY EARLY TILLOTSON SOUNDER: Similar to above but smaller. Armiture
patent reads "Patent July 1874. No address on base. >Traded out.
693 * UNUSUAL TRANSITIONAL SOUNDER WITH VERTICAL
AND HORIZONTAL SPRINGS:(17KB) This is an interesting sounder
which has parts for both horizontal and vertical springs. Although
the Anvil is broken off, you can see where the horizontal spring
adjusting screw was mounted. You can also see how the vertical spring
was mounted. The transition from horizontal springs to vertical
springs is generally believed to signal a major shift in
sounder design strategy and this sounder appears to incorporate
both designs.
693a Another view of the Transitional Sounder:(16KB)
694 * VERY EARLY GREELEY SOUNDER: All plated. E. S.GREELEY & CO.
5 & 7 Dey St. New York.
740 VERY UNUSUAL SOUNDER-ACTUATOR?:(8KB)
This extremely unusual sounder/Actuator was found at an abandonned
railroad station in the far west. It is of cast iron
construction and looks very early. The sounder mechanism has
an added long lever which allows it to act as an actuator to
perhaps activate another mechanical mechanism.
800 * EXTREMELY EARLY TILLOTSON RELAY:(33KB)
This extremely early L.C. Tillotson relay exhibits the early
spring-through-the-post design along with the post-mounted contacts.
These features were abandonned early in the design of relays. It
is stamped L.C.T. & CO. 6 DEY ST. NY. 60 ohms. Circa 1850's. (Traded
to John Casale - W2NI.)
945 VERY EARLY TELEGRAPH PLUG-BOARD:(33KB)
This board was used to connect office telegraph instruments
to 4 telegraph lines. Brass plugs with insulated handles
shorted the blocks together and made the connections.
945a Another view of the plug-board:(33KB)
945b The back of the plub-board:(32KB)
Click on photographs then click "GO BACK" to return to text.
KEYS (1001-1500), KEYS & SOUNDERS (1501-2000), SOUNDERS (2001-2500),
REGISTERS, RELAYS, & OTHER (2501-3000)
(The instruments are in approximate chronological order: Oldest first.)
* = (Items no longer owned.) ** = (Items in other collections.)
1005 THOMAS A. EDISON DUPLEX TELEGRAPH MODEL:(30KB)
This model, manufactured in Edison's laboratory consists of a
1 X 2 Ft. board (28KB) with a
set of wires on the bottom (34KB).
On this board, 3 wind-up clockwork mechanisms labeled "Terry Clock Co.
Waterbury, CT, Pat'd Dec 1, 1868 are mounted.
Each clockwork mechanism has had its escapement
removed and replaced with an air-propellor to govern its speed (47KB).
Each clockwork mechanism turns a rotating disk that
makes contact with an adjustable wiper contact (46KB).
The disk has an insulated spot that breaks
the contact at an adjustable point in its rotation (54KB).
The device was an early experimental model of a form of mechanical
time-division multiplex designed to allow 3 telegraph messages to be
sent on the same line.
1010 * K1BH's TRANSATLANTIC CABLE KEY:(32KB)
Small double (plated) lever key with ivory knobs on Gutta-Perchia
base stamped: Edouard BOUTY. Constructeur. Traded to K1BH, 1995.
1011 * VERY EARLY EUROPEAN SUBMARINE TELEGRAPH CABLE KEY:
(61KB) This is an unusual and very early cable key. Some of the
insulators are ivory. The maker is not known.
1011a * Another view of the cable key:(60KB)
1011b * Another view of the cable key:(60KB)
1011c * Another view of the cable key:(60KB)
1011d * Another view of the cable key:(60KB)
1011e * A view of the wiring under the base of the
cable key:(60KB)
1012 SIEMENS BROTHERS CABLE KEY:(29KB)
This massive cable key has its entire mechanism mounted on high
columns above the base because of the high voltages which
were often necessary in order to transmit messages through
the very long cables. It measures 6-1/4"long by 4-1/2"wide
by 5" high. The base is stamped Siemens Brothers & Co. The
unusual triangular levers are used to hold the contacts in
the closed position.
1014 * ELLIOTT BROTHERS CABLE KEY:(20KB)
Large and massive cable key similar to 1012 with the high
voltage columns but labelled Elliott
Brothers and with brass handled shorting cams.>K5VT
1015 UNUSUAL ROCKER-TYPE BRITISH CABLE KEY:
This is a very unusual cable key that uses a rocker-type mechanism.
Pressing the left knob puts a positive voltage on the cable and pushing the
right knob puts a negative voltage on the cable. There is no maker's name on
the key but the hardware strongly suggests that it is British.
1016 * Ted Huston's CABLE DISCHARGE KEY:(14KB)
This large key was used to discharge the capacitances on
the long submarine cables in order to permit measurements.
The high columns isolate the high voltages on the mechanism from
the base. It is in the Ted Huston collection.
1019 * CABLE KEY LITERATURE SHOWING/DESCRIBING
ABOVE KEYS:(80KB)
This page shows some of the keys (shown above) which were used for
submarine telegraph signalling and testing on the Washington
to Alaska Military Cable and Telegraph System.
1020 * VERY EARLY AND UNUSUAL STRAIGHT KEY:(15KB)
Heavy long oval brass base with round hole in the middle. steel lever.
Extremely unusual round brass bar under steel lever runs between left
and right upright pivot posts. Shorting lever under this bar is
stamped WESTERN ELECTRIC CO.
1025 * VERY EARLY STRAIGHT KEY: Old all-brass key has a straight 1/4X1/4
inch brass lever bent down for an early-style knob. Wooden base with
cotton-covered wires embedded in channels on the underside. The spring
has a long gentle taper like Clapp-Eastham "Boston" key which it slightly
resembles.
1026 * VERY EARLY STRAIGHT KEY & SOUNDER:(32KB)
Key like #1025 with matching sounder.
1050 BEARINGLESS ''STEINER'' KEY: (20KB)
The Steiner key is a very small key which is characterized by
having no trunnion or bearings. The lever is supported only by a spring
and knife edge. This one has a brass base which is stamped
W.E.Co. New York. Pat'd Dec.21,1880. Mounted on newer wooden base.
1054 ''RESTORED'' STEINER KEY: (17KB)
This is a small Steiner Key which has had its long legs cut off
so it could be mounted on a metal base. The key has been
chrome plated and the insulators have been replaced with white
plastic material. The shorting lever knob has been replaced with
a machined knob. I personally prefer to leave these keys in the
as-found condition with perhaps a light cleaning to remove dirt.
1054a Another
view of the ''RESTORED'' Steiner Key: (17KB)
1055 STEINER KEY: (28KB)
This is a small Steiner Key whose design is characterized
by having no trunnion and the lever supported only by a spring
and knife edge. Brass base stamped W.E.Co. New York.
Pat'd Dec.21,1880. This one has been mounted on a newer marble base.
1057 * STEINER KEY WITH UNUSUAL WESTERN ELECTRIC
SOUNDER:(15KB)
This Steiner Key was used with this very unusual Western Electric
Sounder. The key has a brass base stamped W.E.Co. New York.
Pat'd Dec.21,1880. The sounder has an unusual round anvil. I believe that
this is a transitional design between the Western Electric
rectangular frame sounders and the Western Electric all round
frame sounders.
1057a * Closer view of the Steiner Key:(11KB)
1057b * Closer view of the Round-Anvil Western Electric
Sounder:(12KB)
1062 * PRIVATE-LINE CAST-BASE KOB WITH STEINER
KEY:(35KB) This KOB has a Steiner Key and sounder cast into
it's base. Private-Line KOB's were designed to be used on
''private telegraph lines'' in homes and businesses. They were
made on cast iron bases which were often decorated with flowers
and designs to better integrate into a home or business environment.
1067 EXCEPTIONALLY UNUSUAL STEINER KEY AND STRANGE AND
COMPLEX RELAY ON WOODEN BASE, KOB:(40KB)
This instrument was probably made and used by Western Electric since they
were the most frequent users of Steiner keys. Its base was covered with mud
indicating that it was immersed in a flood at some time. Removal of some mud
revealed that the base and key were painted black while the relay was nickel
plated brass.
The Steiner key is the only one if its kind that I have ever seen. It has a
rectangular frame over the lever. This rectangular frame converts the
normally-open contacts of the Steiner key into normally-closed contacts. All
of the Steiner keys that I have seen are configured like the one on the
Private-Line KOB and other Steiner keys shown above and have normally open
contacts and no rectangular frame. I believe that the closed-circuit feature
of this Steiner key was probably found to be necessary to work with the
complex relay system to produce some sort of duplex operation.
The most unusual feature of this instrument is the extremely complex relay
mounted on its wooden base. It was probably used in some kind of duplex
circuit. Duplex circuits often employed complex relays in an attempt to send
two signals on the same line and this is certainly a very complex relay. It
has a set of single-pole double-throw contacts on top that move back and forth
when BOTH of the coils are energized simultaneously. It has another set of
single-pole double-throw contacts located toward the key that move from side
to side when one OR the other coil is activated or when there is an imbalance
in the pull exerted by the two coils. This is generally called a polar relay
configuration in that the contact remains in its last position untill pulled
over by the other coil. It is also clear that a box, probably made of wood,
was mounted on the four pins that stick up around the relay. The exposed
coils that could be easily damaged also suggest that the box was used to
protect them and perhaps to keep people from trying to adjust the
very delicate mechanism. Close views of the underside of the base show that
the wiring was changed probably several times in what must have been an
attempt to explore different circuit configurations.
1067a Another perspective view of the
instrument in as-found condition:(38KB)
1067i A closer view of the unique Steiner
Key:(36KB)
1067b A closer view of the mechanism showing the contacts
that are activated when BOTH of the coils are energized:(37KB)
1067c Another close view of the mechanism showing the
contacts that are acrivated when BOTH coils are energized:(37KB)
1067j A Close View of the contacts that activate when
BOTH coils are energized:(43KB)
1067k A Close View of the contacts of the Polar Relay that
are activated when One OR the Other coil is energized:(43KB)
1067g A Right Side View of the KOB after cleaning
the base:(406KB)
1067h A Left Side View of the KOB after
cleaning:(36KB)
1067d The wiring under the base:(38KB)
1067e Details of the wiring & markings under the
base:(38KB)
1067f Details of the markings under the
base:(38KB)
1070 * VERY UNUSUAL LEFLEY LEG KEY:(20KB)
This is a very hard to find key with an unusual shorting lever
which moves forward-and-back rather than side-to-side. Traded to K5VT.
1070a * Another view of the Lefley Key:(18KB)
1070b * Another view of the Lefley Key:(21KB)
1070c * Another view of the Lefley Key:(22KB)
1075 VERY UNUSUAL "M. BIGGS" LEG KEY: (23KB)
Very unusual early all brass design with normally-open contacts out at
far end of key armiture. Brass armiture engraved M. BIGGS. Pat Oct 20,
'86. Standard Electric Co. Louisville, KY. Brass shorting lever and
all brass legs with wing nuts.
1080 PUMP HANDLE KEY (The "Twentieth
Century Key"):(48KB)
Serial #386. All brass key with hanging wooden lever shaped like
a pump handle, mounted on very heavy cast iron base. Wooden lever is
pushed left to make contact. This key was designed to help overcome
"Telegrapher's Paralysis" which we now call "Carpal Tunnel Syndrome".
A small knob on the front of the key acts as the shorting switch.
Key stamped "Made by Foote Pierson & Co. New York. Pat Applied For."
1082 PUMP HANDLE KEY:1082 ("The Twentieth Century Key").As above.Serial #1067.
(Traded to K5VT).
1125 * MODERN SWEDISH ERICSSON-STYLE KEY:(21KB)
A modern version of the lovely Ericsson keys shown below. (This key
is the same as number 5050.)
1200 LARGE EARLY SWEDISH ERICSSON-STYLE KEY:(15KB)
This is the classic early Swedish land-line key made from the 1870s well
into the 20th Century. The key has a very long lever and a crisp 'feel'.
Operators were trained to sit in front of the operating table with their
upper arm straight down and their lower arm pointing straight ahead. Their
seat height was adjusted so their arms made a right angle with each other.
Their lower arm was thus parallel with the operating table. They were
taught to grasp the key knob firmly with thumb and forefingers and to
use ONLY up and down whole-arm movements to operate the key. You can see
the cuts in the wooden base which were used to allow the wires to come
up to the key connectors from the operating table. This is my
all-time favorite key to own and to operate on the air.
1215 SWEDISH ERICSSON-STYLE KEY: (49KB)
Very large old all-brass key on a wooden base with very long lever and
beautiful brass hardware and switch block. Made in 1880's by ERICSSON
or KUNGLIGA TELEGRAFUERKET (The Royal Telegraph Administration) at
their NYNASHAMN factory S. of Stockholm.
1217 SWEDISH ERICSSON-STYLE KEY: (49KB)
Same as above but plated brass.
1219 SWEDISH ERICSSON KEY: (45KB)
Like 1215 but smaller and perhaps older.
{1222} 5060 * {Duplicated from Wireless Keys section.}
EARLY DANISH - GREAT NORTHERN TELEGRAPH WORKS KEY:
This Danish key carries a label that reads: Great Northern Telegraph Works,
Copenhagen, Denmark. No. 77773. It is not likely that 77773 of these keys
were made since they do not show up very often. I think it is more likely
that the manufacturer started with a high serial number. The picture was sent
to me by another collector.
{1223} 5070 * {Duplicated from Wireless Keys section.}
LATER DANISH - GREAT NORTHERN TELEGRAPH WORKS KEY:
This appears to be a later version of the Danish key above. This Danish key
carries a label that reads: Great Northern Telegraph Works, Copenhagen,
Denmark. No. 13779. Since it is not likely that 13779 of these keys were made
it is more likely that the manufacturer started with a high serial number.
Circa 1960s. The picture was sent to me by another collector.
1224 * DANISH ERICSSON-STYLE KEY:(16KB)
Long 7" lever on black plastic base. Circa 1960s.
1225 FRENCH PTT KEY:(28KB)
Used in France by the Poste and Telegraph Offices. Massive all-brass
key w/straight lever mounted on well worn wooden base.
1226 FRENCH PTT KEY:(14KB)
Used in France by the Poste and Telegraph Offices. Massive all-brass
key w/straight lever mounted on wooden base.
1228 * LARGE WELLS FARGO KEY:(32KB)
Large 5" rectangular brass lever with round, skirted knob mounted
on a 2x5" wooden base. Underside stamped: NATIONAL STATE CAPITAL
BANK, Wells Fargo Agents.
1229 * SMALL WELLS FARGO KEY:(23KB)
As above with 4" lever on 2x4" wooden base.
1235 * EARLY BRITISH TELEGRAPH KEY:(34KB)
Very large all brass key on large wooden base with brass
"SEND - RECEIVE" switch.>>W2PM
1237 EARLY BRITISH TELEGRAPH KEY:(13KB)
Classic straight lever brass British land-line telegraph key
on wooden base.
1240 EARLY BRITISH "WALTERS" LAND-LINE KEY:(13KB)
The unique and unusual design of this key includes a flat spring
steel strip (Similar to that on a Steiner Key) instead of a
trunnion shaft. The contacts are enclosed in the round brass
cylinder at the middle of the key.
1242 EARLY BRITISH GPO LAND-LINE KEY:(19KB)
This lovely early key is marked PATT 1056A.
1245 ** EARLY BRITISH LAND-LINE KEY MADE BY ELLIOTT
BROTHERS:(15KB)
This lovely early brass land-line key is owned by
collector Peter Malvasi - W2PM.
1250 BRITISH DOUBLE CURRENT KEY:(28KB)
Elaborate key with complex mechanism enclosed within a circle.
Sent out a weak negative signal between dots and dashes to
depolarize very long telegraph lines & counteract the capacitance.
I have seen some examples of these keys with the 'Siemens Brothers,
London' label. This one has no label.
1251 BRITISH DOUBLE CURRENT KEY:(38KB)
This is another example of the above key. I have taken pictures
of the complex mechanism to try to clarify its design.
1252 * BRITISH DOUBLE CURRENT KEY: (28KB)
Similar to 1250 but all brass with brass cover over contacts.
Engraved: TYLER & CO., Ltd. 1923 III 1915
1255 * SPECIAL BRITISH RAILROAD TELEGRAPH KEY: (16KB)
This unusual key is built on the same metal base as a solenoid-operated
bell. It was used on the British Railroads as the bottom element of an LNWR
(London & North Western Railway) block instrument that was made ca. 1890-1925.
A few remain in use to this day.
1260 EARLY AUSTRALIAN LAND-LINE KEY:(58KB)
This is the earliest Australian land-line key. Many of the early
features of this key were carried on into later Australian key designs
such as number 1262 and finally into the modern Clipsal keys.
(number 9190).
1262 LATER AUSTRALIAN LAND-LINE KEY:(59KB)
This key shows the design influences from the early Australian key
(number 1260) and led the way to the more modern:
1270 ** INDIAN LAND LINE TELEGRAPH KEYS:
These three keys were purchased in India by collector Jack Klobuchar - W1TEC.
They include one very early and two more recent keys. The oldest key
was made by the India Electric Works Ltd. of Calcutta, India. Keys like these
are still being used on the Indian Railroads. The design appears to have been
patterned after early British keys.
1275 * EARLY FRENCH BRASS STRAP KEY:(22KB)
Unusual old multiple part all brass design marked: SOC DES TELEGRAPHES.
ATELIER C.AL. (Atelier means builder.)
1280 * EARLY BRASS STRAP KEY: (14KB)
This very small early strap key is simply a springy brass
strap with contacts and binding posts mounted on an old
wooden base.
1282 * VERY EARLY HEAVY BRASS STRAP KEY:(28KB)
This medium sized key consists of a heavy springy brass strap with
interesting upper and lower contacts and binding posts mounted on
a heavy black marble-like base.
1283 * SMALL STRAP KEY:(15KB)
This small key consists of a springy metal strap with
a set of lower contacts and binding posts mounted on
a wooden board.
1284 * SMALL STRAP KEY:(14KB)
This small key is similar to number 1283. It
consists of a springy metal strap with
a set of lower contacts and binding posts mounted on
a wooden board.
1290 EARLY SWISS / ITALIAN LAND LINE KEY:(31KB)
Heavy brass key with 1/2 X 5/16 X 4-1/2" straight lever. Adjustable
pull-down spring beyond pivot. Doorknob shaped knob. Make & Break
contacts. Huge adjusting screws. All
1200a Another View of the Swedish Key:(16KB)
1200b Another View of the Swedish Key:(17KB)
1221 * SWEDISH ERICSSON KEY: More modern version of above. Circa 1960s.
1222 * SWEDISH/NATO ERICSSON-STYLE KEY: Long 7" lever on
brown base. Circa 1960s.
5060a * The Label on the
Early Danish key:
5070a * The Label on the Danish key:
5070b * The Underside of the Danish key:
5070c * The Removable Base of the Danish key showing the
modular connectors:
1226a Another view of the FRENCH PTT KEY:(14KB)
1228a Another view of the WELLS FARGO Key:(12KB)
1237a Another view of the British key:(13KB)
1242a Another view of the BRITISH LAND-LINE
KEY:(16KB)
1251a Right-Side top view of the key:(36KB)
1251b Closer view of the top of the key:(50KB)
1251c A view of the bottom of the key:(33KB)
1255a Closer view of the British Railroad
key/bell: (14KB)
9190 Australian Clipsal key (number 9190):(54KB)
1270a ** A closer view of the oldest Indian Key:
1270b ** A closer view of the label on the
oldest Indian Key:
1282a Another closer view of the strap key:(17KB)
